On Sat, 18 Jun 2022 at 16:02, Stephan Gerhold <stephan@xxxxxxxxxxx> wrote: > > On Fri, Jun 17, 2022 at 11:34:24PM +0300, Dmitry Baryshkov wrote: > > On Fri, 17 Jun 2022 at 20:14, Stephan Gerhold <stephan@xxxxxxxxxxx> wrote: > > > > > > If we want to change this to the actual votable clock later this should > > > probably be <&rpmcc RPM_SMD_XO_CLK_SRC>. AFAIK that clock exists in RPM > > > on MSM8916 but was never added to the clk-smd-rpm driver (for MSM8916). > > > > > > Not sure where the pin-controlled BB_CLK1 is coming from here. :) > > > > It came from the schematics I had at hand (db410c). It uses the > > BB_CLK1 together with the enable pin. I'll probably use xo_board for > > now and postpone changing this to rpmcc clock until the next attempt > > to read msm-3.x code. > > > > Hmm, you're right - BB_CLK1 goes to CXO on most MSM8916+PM8916 devices. > I think the msm-3.10 kernel still controls it via the RPM_SMD_XO_CLK_SRC > though. Quite confusing. :) I will take a look. Thank you for noticing this. -- With best wishes Dmitry
