Hello:
This series was applied to netdev/net-next.git (master)
by Jakub Kicinski <kuba@xxxxxxxxxx>:
On Tue, 14 Jun 2022 10:46:09 +0200 you wrote:
> We have a board where measurements indicate that the current three
> options - leaving IO_IMPEDANCE_CTRL at the reset value (which is
> factory calibrated to a value corresponding to approximately 50 ohms)
> or using one of the two boolean properties to set it to the min/max
> value - are too coarse.
>
> This series adds a device tree binding for an nvmem cell which can be
> populated during production with a suitable value calibrated for each
> board, and corresponding support in the driver. The second patch adds
> a trivial phy wrapper for dev_err_probe(), used in the third.
>
> [...]
Here is the summary with links:
- [net-next,v2,1/3] dt-bindings: dp83867: add binding for io_impedance_ctrl nvmem cell
https://git.kernel.org/netdev/net-next/c/ab1e9de84aff
- [net-next,v2,2/3] linux/phy.h: add phydev_err_probe() wrapper for dev_err_probe()
https://git.kernel.org/netdev/net-next/c/a793679827a8
- [net-next,v2,3/3] net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell
https://git.kernel.org/netdev/net-next/c/5c2d0a6a0701
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
