Re: [PATCH v4 11/23] dt-bindings: ata: ahci: Add platform capability properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 14, 2022 at 04:19:17PM -0600, Rob Herring wrote:
> On Fri, Jun 10, 2022 at 11:17:49AM +0300, Serge Semin wrote:
> > In case if the platform doesn't have BIOS or a comprehensive firmware
> > installed then the HBA capability flags will be left uninitialized. As a
> > good alternative we suggest to define the DT-properties with the AHCI
> > platform capabilities describing all the HW-init flags of the
> > corresponding capability register. Luckily there aren't too many of them.
> > SSS - Staggered Spin-up support and MPS - Mechanical Presence Switch
> > support determine the corresponding feature availability for the whole HBA
> > by means of the "hba-cap" property. Each port can have the "hba-port-cap"
> > property initialized indicating that the port supports some of the next
> > functionalities: HPCP - HotPlug capable port, MPSP - Mechanical Presence
> > Switch attached to a port, CPD - Cold Plug detection, ESP - External SATA
> > Port (eSATA), FBSCP - FIS-based switching capable port.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> > 
> > ---
> > 
> > Changelog v4:
> > - Fix some misspelling in the patch log.
> > - Convert the boolean properties to the bitfield properties. (@Rob)
> > - Remove Hannes' rb tag due to the patch content change.
> > ---
> >  .../devicetree/bindings/ata/ahci-common.yaml  | 16 +++++++++++++++
> >  .../bindings/ata/ahci-platform.yaml           | 10 ++++++++++
> >  include/dt-bindings/ata/ahci.h                | 20 +++++++++++++++++++
> >  3 files changed, 46 insertions(+)
> >  create mode 100644 include/dt-bindings/ata/ahci.h
> > 
> > diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > index 12a97b56226f..94d72aeaad0f 100644
> > --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > @@ -58,6 +58,14 @@ properties:
> >    phy-names:
> >      const: sata-phy
> >  
> > +  hba-cap:
> > +    $ref: '/schemas/types.yaml#/definitions/uint32'
> > +    description:
> > +      Bitfield of the HBA generic platform capabilities like Staggered
> > +      Spin-up or Mechanical Presence Switch support. It can be used to
> > +      appropriately initialize the HWinit fields of the HBA CAP register
> > +      in case if the system firmware hasn't done it.
> > +
> >    ports-implemented:
> >      $ref: '/schemas/types.yaml#/definitions/uint32'
> >      description:
> > @@ -101,6 +109,14 @@ $defs:
> >        target-supply:
> >          description: Power regulator for SATA port target device
> >  
> > +      hba-port-cap:
> > +        $ref: '/schemas/types.yaml#/definitions/uint32'
> > +        description:
> > +          Bitfield of the HBA port-specific platform capabilities like Hot
> > +          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
> > +          for details). It can be used to initialize the HWinit fields of
> > +          the PxCMD register in case if the system firmware hasn't done it.
> > +
> >      required:
> >        - reg
> >  
> > diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> > index 15be98e0385b..e19cf9828e68 100644
> > --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> > +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> > @@ -111,6 +111,8 @@ examples:
> >    - |
> >      #include <dt-bindings/interrupt-controller/arm-gic.h>
> >      #include <dt-bindings/clock/berlin2q.h>
> > +    #include <dt-bindings/ata/ahci.h>
> > +
> >      sata@f7e90000 {
> >          compatible = "marvell,berlin2q-ahci", "generic-ahci";
> >          reg = <0xf7e90000 0x1000>;
> > @@ -119,15 +121,23 @@ examples:
> >          #address-cells = <1>;
> >          #size-cells = <0>;
> >  
> > +        hba-cap = <HBA_SMPS>;
> > +
> >          sata0: sata-port@0 {
> >              reg = <0>;
> > +
> >              phys = <&sata_phy 0>;
> >              target-supply = <&reg_sata0>;
> > +
> > +            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
> >          };
> >  
> >          sata1: sata-port@1 {
> >              reg = <1>;
> > +
> >              phys = <&sata_phy 1>;
> >              target-supply = <&reg_sata1>;
> > +
> > +            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
> >          };
> >      };
> > diff --git a/include/dt-bindings/ata/ahci.h b/include/dt-bindings/ata/ahci.h
> > new file mode 100644
> > index 000000000000..6841caebcedf
> > --- /dev/null
> > +++ b/include/dt-bindings/ata/ahci.h
> > @@ -0,0 +1,20 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> 

> Dual license.

Ok.

> 
> With that,
> 
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Thanks.

-Sergey

> 
> > +/*
> > + * This header provides constants for most AHCI bindings.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_ATA_AHCI_H
> > +#define _DT_BINDINGS_ATA_AHCI_H
> > +
> > +/* Host Bus Adapter generic platform capabilities */
> > +#define HBA_SSS		(1 << 27)
> > +#define HBA_SMPS	(1 << 28)
> > +
> > +/* Host Bus Adapter port-specific platform capabilities */
> > +#define HBA_PORT_HPCP	(1 << 18)
> > +#define HBA_PORT_MPSP	(1 << 19)
> > +#define HBA_PORT_CPD	(1 << 20)
> > +#define HBA_PORT_ESP	(1 << 21)
> > +#define HBA_PORT_FBSCP	(1 << 22)
> > +
> > +#endif
> > -- 
> > 2.35.1
> > 
> > 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux