Re: [PATCH v2 7/7] drm/bridge: anx7625: Add typec_mux_set callback function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nícolas,

On Mon, Jun 13, 2022 at 1:51 PM Nícolas F. R. A. Prado
<nfraprado@xxxxxxxxxxxxx> wrote:
>
> Hi Prashant,
>
> On Thu, Jun 09, 2022 at 06:09:46PM +0000, Prashant Malani wrote:
> > From: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> >
> > Add the callback function when the driver receives state
> > changes of the Type-C port. The callback function configures the
> > crosspoint switch of the anx7625 bridge chip, which can change the
> > output pins of the signals according to the port state.
> >
> > Signed-off-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> > Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
> > ---
> >
> > Changes since v2:
> > - No changes.
> >
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 58 +++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/analogix/anx7625.h | 13 +++++
> >  2 files changed, 71 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index d41a21103bd3..2c308d12fab2 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -15,6 +15,7 @@
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> > +#include <linux/usb/typec_dp.h>
> >  #include <linux/usb/typec_mux.h>
> >  #include <linux/workqueue.h>
> >
> > @@ -2582,9 +2583,66 @@ static void anx7625_runtime_disable(void *data)
> >       pm_runtime_disable(data);
> >  }
> >
> > +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> > +                                       enum typec_orientation orientation)
> > +{
> > +     if (orientation == TYPEC_ORIENTATION_NORMAL) {
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                               SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                               SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> > +     } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                               SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                               SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> > +     }
> > +}
> > +
> > +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> > +{
> > +     if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected)
> > +             /* Both ports available, do nothing to retain the current one. */
> > +             return;
> > +     else if (ctx->typec_ports[0].dp_connected)
> > +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> > +     else if (ctx->typec_ports[1].dp_connected)
> > +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> > +}
> > +
> >  static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> >                                struct typec_mux_state *state)
> >  {
> > +     struct anx7625_port_data *data = typec_mux_get_drvdata(mux);
> > +     struct anx7625_data *ctx = data->ctx;
> > +     struct device *dev = &ctx->client->dev;
> > +
> > +     bool old_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > +                              ctx->typec_ports[1].dp_connected);
>
> Here you're assuming you have 2 switches. Given that this on its own doesn't do
> anything, just move it after the
>
>         if (ctx->num_typec_switches == 1)
>                 return 0;
>
> check.

Sure. I will fix this up in v3. Thanks!

>
> Thanks,
> Nícolas
>
> > +     bool new_dp_connected;
> > +
> > +     if (ctx->num_typec_switches == 1)
> > +             return 0;
> > +
> > +     dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
> > +             ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected);
> > +
> > +     data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> > +                           state->alt->mode == USB_TYPEC_DP_MODE);
> > +
> > +     new_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > +                         ctx->typec_ports[1].dp_connected);
> > +
> > +     /* dp on, power on first */
> > +     if (!old_dp_connected && new_dp_connected)
> > +             pm_runtime_get_sync(dev);
> > +
> > +     anx7625_typec_two_ports_update(ctx);
> > +
> > +     /* dp off, power off last */
> > +     if (old_dp_connected && !new_dp_connected)
> > +             pm_runtime_put_sync(dev);
> > +
> >       return 0;
> >  }
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 76cfc64f7574..7d6c6fdf9a3a 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -55,6 +55,18 @@
> >  #define HPD_STATUS_CHANGE 0x80
> >  #define HPD_STATUS 0x80
> >
> > +#define TCPC_SWITCH_0 0xB4
> > +#define SW_SEL1_DPTX0_RX2 BIT(0)
> > +#define SW_SEL1_DPTX0_RX1 BIT(1)
> > +#define SW_SEL1_SSRX_RX2 BIT(4)
> > +#define SW_SEL1_SSRX_RX1 BIT(5)
> > +
> > +#define TCPC_SWITCH_1 0xB5
> > +#define SW_SEL2_DPTX1_TX2 BIT(0)
> > +#define SW_SEL2_DPTX1_TX1 BIT(1)
> > +#define SW_SEL2_SSTX_TX2 BIT(4)
> > +#define SW_SEL2_SSTX_TX1 BIT(5)
> > +
> >  /******** END of I2C Address 0x58 ********/
> >
> >  /***************************************************************/
> > @@ -444,6 +456,7 @@ struct anx7625_i2c_client {
> >  };
> >
> >  struct anx7625_port_data {
> > +     bool dp_connected;
> >       struct typec_mux_dev *typec_mux;
> >       struct anx7625_data *ctx;
> >  };
> > --
> > 2.36.1.476.g0c4daa206d-goog
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux