Enable rx, tx and va macro codecs and soundwire nodes for
CRD rev5+ (aka CRD 3.0/3.1) boards.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 20 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 22 ++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index d92575e..32927db 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -103,6 +103,18 @@ ap_ts_pen_1v8: &i2c13 {
};
};
+&lpass_rx_macro {
+ status = "okay";
+};
+
+&lpass_tx_macro {
+ status = "okay";
+};
+
+&lpass_va_macro {
+ status = "okay";
+};
+
&mdss_edp {
status = "okay";
};
@@ -135,6 +147,14 @@ ap_ts_pen_1v8: &i2c13 {
status = "okay";
};
+&swr0 {
+ status = "okay";
+};
+
+&swr1 {
+ status = "okay";
+};
+
/* PINCTRL - BOARD-SPECIFIC */
/*
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index d59002d..e933ebf 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -303,6 +303,10 @@
modem-init;
};
+&lpass_va_macro {
+ vdd-micb-supply = <&vreg_bob>;
+};
+
/* NOTE: Not all Qcards have eDP connector stuffed */
&mdss_edp {
vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
@@ -375,6 +379,24 @@
no-sdio;
};
+&swr0 {
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ #sound-dai-cells = <1>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ #sound-dai-cells = <1>;
+ qcom,tx-port-mapping = <1 2 3 4>;
+ };
+};
+
uart_dbg: &uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
--
2.7.4
