Re: [PATCH V6 2/2] rtc: zynqmp: Add calibration set and get support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/06/2022 16:50:03+0200, Peter Korsgaard wrote:
> >>>>> "Srinivas" == Srinivas Neeli <srinivas.neeli@xxxxxxxxxx> writes:
> 
>  > Zynqmp RTC controller has a calibration feature to compensate
>  > time deviation due to input clock inaccuracy.
>  > Set and get calibration API's are used for setting and getting
>  > calibration value from the controller calibration register.
>  > As per RTC spec default calibration value is 0x7FFF.
> 
> Where do you see that? ug1085 rev2.2 still lists:
> 
> Programming Sequences
> init rtc
> 1. Write the value 0019_8231h into the calibration register, CALIB_WRITE.
> 

This is a very weird value. Last time I had a look, I couldn't find an
explanation for it.

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux