[PATCH 0/2] remoteproc: imx: add start up delay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peng Fan <peng.fan@xxxxxxx>

There is case that after remoteproc start remote processor[M4], the M4
runs slow and before M4 finish its own rpmsg framework initialization,
linux sends out vring kick message, then M4 firmware drops the kick
message. Some NXP released Cortex-M[x] images has such limitation that
it requires linux sends out vring kick message after M4 firmware finish
its rpmsg framework initialization.

The best case is to use a method to let M4 notify Linux that M4 has
finished initialization, but we could not patch released firmware,
then update driver to detect notification. 

So add delay before linux send out vring kick message. It is not good to
use a fixed time delay in driver, so I choose to get that from device
tree.

Peng Fan (2):
  dt-bindings: remoteproc: imx_rproc: add fsl,startup-delay-ms
  remoteproc: imx_rproc: delay after kick remote processor

 .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml    | 4 ++++
 drivers/remoteproc/imx_rproc.c                           | 9 +++++++++
 2 files changed, 13 insertions(+)

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux