The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
.../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
index b63eefab48bd..064f7f549665 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
@@ -83,25 +83,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 169fbb7cfd34..04f8524b5335 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -18,25 +18,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--
2.34.1
