MMIO devices should be inside of a soc bus node, as it's done for the
vast majority of ARM64 devicetrees, and for almost all MTK devicetrees.
Create a simple-bus soc node and move all devices with a MMIO address
space in there.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt6795.dtsi | 105 ++++++++++++-----------
1 file changed, 56 insertions(+), 49 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index c85659d0ff5d..167f90bd991a 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -117,59 +117,66 @@ timer {
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
- sysirq: intpol-controller@10200620 {
- compatible = "mediatek,mt6795-sysirq",
- "mediatek,mt6577-sysirq";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- reg = <0 0x10200620 0 0x20>;
- };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6795-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
- gic: interrupt-controller@10221000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
- reg = <0 0x10221000 0 0x1000>,
- <0 0x10222000 0 0x2000>,
- <0 0x10224000 0 0x2000>,
- <0 0x10226000 0 0x2000>;
- };
+ gic: interrupt-controller@10221000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10221000 0 0x1000>,
+ <0 0x10222000 0 0x2000>,
+ <0 0x10224000 0 0x2000>,
+ <0 0x10226000 0 0x2000>;
+ };
- uart0: serial@11002000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11002000 0 0x400>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
- uart1: serial@11003000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11003000 0 0x400>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
- uart2: serial@11004000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11004000 0 0x400>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
- };
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
- uart3: serial@11005000 {
- compatible = "mediatek,mt6795-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11005000 0 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
- status = "disabled";
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6795-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
};
};
--
2.35.1
