Hi Luca, On 6/7/2022 6:46 PM, Luca Weiss wrote:
Hi Satya, On Tue Jun 7, 2022 at 1:50 PM CEST, Satya Priya wrote:Add base DTS file for pm8008. Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- Changes in V14: - None. Changes in V13: - None. Changes in V12: - None. Changes in V11: - Remove intermediate regulators node and add the ldos under pm8008@8 node. - change the address cells as 2 for pm8008 parent mfd node. - add compatible to register the ldos. - add reg with i2c client offset and address. arc arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi new file mode 100644 index 0000000..6f37e4d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.I noticed this file was licensed as BSD-3-Clause in V13 and this change was not mentioned in the "Changes" part. Any specific reason? Especially newer dts files should be BSD-licensed, and having this GPL dtsi included in otherwise BSD dts files is not good.
I changed it as per the suggestions of Qualcomm internal review team but i see that many of the drivers use BSD license, will change this back to BSD-3-Clause.
Regards Luca
