The NXP TDA998x HDMI transmitter may transmit audio to the HDMI link from 2 different sources, I2S and S/PDIF. This patch set adds an interface between the HDMI transmitter and the HDMI CODEC. The interface is used by the TDA998x driver to update the audio constraints from the display characteristics (EDID) and by the audio subsystem to connect the chosen audio source to the HDMI link. v6: - extend the HDMI CODEC instead of using a specific CODEC v5: - use the TDA998x private data instead of a specific area for the CODEC interface - the CODEC is TDA998x specific (Mark Brown) v4: - remove all the TDA998x specific stuff from the CODEC - move the EDID scan from the CODEC to the TDA998x - move the CODEC to sound/soc (Mark Brown) - update the audio_sample_rate from the EDID (Andrew Jackson) v3: fix bad rate (Andrew Jackson) v2: check double stream start (Mark Brown) Jean-Francois Moine (2): ASoC:codecs: Add a transmitter interface to the HDMI CODEC drm/i2c:tda998x: Use the HDMI audio CODEC .../devicetree/bindings/drm/i2c/tda998x.txt | 18 ++ drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 299 +++++++++++++++++++-- include/sound/hdmi.h | 20 ++ sound/soc/codecs/hdmi.c | 174 +++++++++++- 5 files changed, 488 insertions(+), 24 deletions(-) create mode 100644 include/sound/hdmi.h -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
