This is not acceptable. You have sent a 10 patch patch-set 5 times in 24hrs. To make matters worse, the only patch that has any affiliation to me has already been accepted. Send a patch-set to the list and don't do anything until the patch has either been accepted or the reviews to stop coming in. Then re-send (only the patches that have not yet been accepted) in a week or so, if required. If I have to deal with another 55 repeat emails again, you'll find yourself as an entry in my spam filter. > This patch series adds DT support to the atmel at91sam9 RTC driver. > > It also removes any machine specific inclusions to prepare the migration > to multi platform kernel support, and retain the slow clock to prevent > the CCF from disabling it at the end of boot. > > Best Regards, > > Boris > > Changes since v8: > - fix DT documentation > - add missing '\n' in dev_err messages > > Changes since v7: > - fix typo > - fix sclk_rate test > - state that RTC_DRV_AT91SAM9_RTT and RTC_DRV_AT91SAM9_GPBR are no longer > used when booting a DT board > > Changes since v6: > - fix typos > - add missing commit messages > - rework the Kconfig description > > Changes since v5: > - replace 'rtc' by 'rtt' where appropriate > - fix commit messages > > Changes since v4: > - add a TODO comment to remember removing non DT board support code > > Changes since v3: > - add GPBR DT bindings doc > - fix a coding style issues > - add Alexandre's Acked-by > - change RTT DT bindings > > Changes since v2: > - make use of syscon/regmap to avoid directly requesting/mapping a GPBR > memory region in the RTT driver > > Changes since v1: > - remove non CCF specific case by adding the appropriate clk_lookup > entries in arch/arm/mach-at91/<soc-name>.c files > > Boris BREZILLON (10): > rtc: at91sam9: remove references to mach specific headers > rtc: at91sam9: use standard readl/writel functions instead of raw > versions > rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource > rtc: at91sam9: add DT support > rtc: at91sam9: make use of syscon/regmap to access GPBR registers > rtc: at91sam9: rework the Kconfig description > ARM: at91: add clk_lookup entry for RTT devices > rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK > rtc: at91sam9: add DT bindings documentation > mfd: syscon: add Atmel GPBR DT bindings documention > > .../devicetree/bindings/mfd/atmel,gpbr.txt | 15 +++ > .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 23 ++++ > arch/arm/mach-at91/at91sam9260.c | 2 + > arch/arm/mach-at91/at91sam9261.c | 2 + > arch/arm/mach-at91/at91sam9263.c | 4 + > arch/arm/mach-at91/at91sam9g45.c | 2 + > arch/arm/mach-at91/at91sam9rl.c | 2 + > arch/arm/mach-at91/clock.c | 2 +- > arch/arm/mach-at91/clock.h | 1 + > drivers/rtc/Kconfig | 24 ++-- > drivers/rtc/rtc-at91sam9.c | 138 ++++++++++++++++----- > 11 files changed, 177 insertions(+), 38 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/atmel,gpbr.txt > create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
