[PATCH 2/3] ARM: dts: exynos: Explicitly set dr_mode on arndale-octa

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Explicitly set the dr_mode for the second dwc3 controller on the
Arndale Octa board to host mode. This is required to ensure the
controller is initialized in the right mode if the kernel is build with
USB gadget support

Reported-By: Andreas Färber <afaerber@xxxxxxx>
Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
---
 Changes in v3: new patch
 Changes in v4: Rebased on linux-samsung for-next

 arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 70a559c..7508099 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -367,3 +367,7 @@
 		};
 	};
 };
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux