Re: [PATCH 2/4] arm64: dts: qcom: add SC8280XP platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/06/2022 23:41, Bjorn Andersson wrote:
> Introduce initial support for the Qualcomm SC8280XP platform, aka 8cx
> Gen 3. This initial contribution supports SMP, CPUfreq, CPU cluster
> idling, GCC, TLMM, SMMU, RPMh regulators, power-domains and clocks,
> interconnects, some QUPs, UFS, remoteprocs, USB, watchdog, LLCC and
> tsens.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2195 ++++++++++++++++++++++++
>  1 file changed, 2195 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> new file mode 100644
> index 000000000000..4143813643ad
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -0,0 +1,2195 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,sc8280xp.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	clocks {
> +		xo_board: xo-board {

xo-board-clk

> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <38400000>;

The clock is probably on the board, so the frequency should be rather
defined in DTS.

> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <32764>;
> +		};
> +	};

(...)

> +
> +		qup1: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0 0x00ac0000 0 0x6000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			clock-names = "m-ahb", "s-ahb";
> +			iommus = <&apps_smmu 0x83 0>;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_hc: ufshc@1d84000 {

Just "ufs" as node name.

> +			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
> +			reg = <0 0x01d84000 0 0x3000>;
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_mem_phy_lanes>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <2>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc UFS_PHY_GDSC>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +
> +			iommus = <&apps_smmu 0xe0 0x0>;
> +
> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>
> +				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk",
> +				      "rx_lane1_sync_clk";
> +			freq-table-hz = <75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>;
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_phy: phy@1d87000 {
> +			compatible = "qcom,sc8280xp-qmp-ufs-phy";
> +			reg = <0 0x01d87000 0 0xe10>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			clock-names = "ref",
> +				      "ref_aux";
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
> +			status = "disabled";
> +
> +			ufs_mem_phy_lanes: phy@1d87400 {
> +				reg = <0 0x01d87400 0 0x108>,
> +				      <0 0x01d87600 0 0x1e0>,
> +				      <0 0x01d87c00 0 0x1dc>,
> +				      <0 0x01d87800 0 0x108>,
> +				      <0 0x01d87a00 0 0x1e0>;
> +				#phy-cells = <0>;
> +				#clock-cells = <0>;
> +			};
> +		};
> +
> +		ufs_card_hc: ufshc@1da4000 {

node name: ufs

> +			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
> +				     "jedec,ufs-2.0";
> +			reg = <0 0x01da4000 0 0x3000>;
> +			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> +			phys = <&ufs_card_phy_lanes>;
> +			phy-names = "ufsphy";
> +			lanes-per-direction = <2>;
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_CARD_BCR>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc UFS_CARD_GDSC>;
> +
> +			iommus = <&apps_smmu 0x4a0 0x0>;
> +
> +			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
> +				 <&gcc GCC_UFS_CARD_AHB_CLK>,
> +				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk",
> +				      "rx_lane1_sync_clk";
> +			freq-table-hz = <75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<75000000 300000000>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>;
> +			status = "disabled";
> +		};
> +
> +		ufs_card_phy: phy@1da7000 {
> +			compatible = "qcom,sc8280xp-qmp-ufs-phy";
> +			reg = <0 0x01da7000 0 0xe10>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			clock-names = "ref",
> +				      "ref_aux";
> +			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
> +				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
> +
> +			resets = <&ufs_card_hc 0>;
> +			reset-names = "ufsphy";
> +			status = "disabled";
> +
> +			ufs_card_phy_lanes: phy@1da7400 {
> +				reg = <0 0x01da7400 0 0x108>,
> +				      <0 0x01da7600 0 0x1e0>,
> +				      <0 0x01da7c00 0 0x1dc>,
> +				      <0 0x01da7800 0 0x108>,
> +				      <0 0x01da7a00 0 0x1e0>;
> +				#phy-cells = <0>;
> +				#clock-cells = <0>;
> +			};
> +		};
> +
> +		tcsr_mutex: hwlock@1f40000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x01f40000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		usb_0_hsphy: phy@88e5000 {
> +			compatible = "qcom,sc8280xp-usb-hs-phy",
> +				     "qcom,usb-snps-hs-5nm-phy";
> +			reg = <0 0x088e5000 0 0x400>;
> +			status = "disabled";

status goes to the end

> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
> +			clock-names = "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +		};
> +
> +		usb_2_hsphy0: phy@88e7000 {
> +			compatible = "qcom,sc8280xp-usb-hs-phy",
> +				     "qcom,usb-snps-hs-5nm-phy";
> +			reg = <0 0x088e7000 0 0x400>;
> +			status = "disabled";

ditto

> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
> +			clock-names = "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
> +		};
> +
> +		usb_2_hsphy1: phy@88e8000 {
> +			compatible = "qcom,sc8280xp-usb-hs-phy",
> +				     "qcom,usb-snps-hs-5nm-phy";
> +			reg = <0 0x088e8000 0 0x400>;
> +			status = "disabled";

ditto

> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
> +			clock-names = "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
> +		};
> +
> +		usb_2_hsphy2: phy@88e9000 {
> +			compatible = "qcom,sc8280xp-usb-hs-phy",
> +				     "qcom,usb-snps-hs-5nm-phy";
> +			reg = <0 0x088e9000 0 0x400>;
> +			status = "disabled";

ditto and so on

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux