On Tue, 07 Jun 2022 13:59:42 +0300, Abel Vesa wrote: > This patch actually addds the fsl,scu.yaml which is only for the > main SCU node. The child nodes schemas will be split in different > yaml files. The old txt file will be removed only after all the > child nodes have been properly switch to yaml. > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx> > --- > .../bindings/arm/freescale/fsl,scu.yaml | 185 ++++++++++++++++++ > 1 file changed, 185 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,scu.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/clock-controller: failed to match any schema with compatible: ['fsl,imx8qxp-clk', 'fsl,scu-clk'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/clock-controller: failed to match any schema with compatible: ['fsl,imx8qxp-clk', 'fsl,scu-clk'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/iomuxc: failed to match any schema with compatible: ['fsl,imx8qxp-iomuxc'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/imx8qx-ocotp: failed to match any schema with compatible: ['fsl,imx8qxp-scu-ocotp'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/imx8qx-pd: failed to match any schema with compatible: ['fsl,imx8qxp-scu-pd', 'fsl,scu-pd'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/imx8qx-pd: failed to match any schema with compatible: ['fsl,imx8qxp-scu-pd', 'fsl,scu-pd'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/rtc: failed to match any schema with compatible: ['fsl,imx8qxp-sc-rtc'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/scu-key: failed to match any schema with compatible: ['fsl,imx8qxp-sc-key', 'fsl,imx-sc-key'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/scu-key: failed to match any schema with compatible: ['fsl,imx8qxp-sc-key', 'fsl,imx-sc-key'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/watchdog: failed to match any schema with compatible: ['fsl,imx8qxp-sc-wdt', 'fsl,imx-sc-wdt'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/watchdog: failed to match any schema with compatible: ['fsl,imx8qxp-sc-wdt', 'fsl,imx-sc-wdt'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/thermal-sensor: failed to match any schema with compatible: ['fsl,imx8qxp-sc-thermal', 'fsl,imx-sc-thermal'] Documentation/devicetree/bindings/arm/freescale/fsl,scu.example.dtb:0:0: /example-0/firmware/scu/thermal-sensor: failed to match any schema with compatible: ['fsl,imx8qxp-sc-thermal', 'fsl,imx-sc-thermal'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
