Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rob Herring <robh@xxxxxxxxxx> writes:

> On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote:
>> The AXP192 PMIC is different enough from the PMICs supported by
>> the AXP20x GPIO driver to warrant a separate driver. The AXP192
>> driver also supports interrupts and pinconf settings.
>> 
>> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
>> ---
>>  .../bindings/gpio/x-powers,axp192-gpio.yaml   | 59 +++++++++++++++++++
>>  1 file changed, 59 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
>> new file mode 100644
>> index 000000000000..7a985640ade8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml
>> @@ -0,0 +1,59 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>> +
>> +title: X-Powers AXP192 GPIO Device Tree Bindings
>> +
>> +maintainers:
>> +  - Chen-Yu Tsai <wens@xxxxxxxx>
>> +
>> +properties:
>> +  "#gpio-cells":
>> +    const: 2
>> +    description: >
>> +      The first cell is the pin number and the second is the GPIO flags.
>> +
>> +  compatible:
>> +    oneOf:
>> +      - enum:
>
> No need for 'oneOf' with only 1 entry.
>

Got it.

>> +          - x-powers,axp192-gpio
>> +
>> +  gpio-controller: true
>> +
>> +patternProperties:
>> +  "^.*-pins?$":
>
> You can omit '^.*'
>
> Why does 's' need to be optional?
>

TBH I just copied this from x-powers,axp209-gpio.yaml. A similar pattern
is used in a few other bindings, eg. allwinner,sun4i-a10-pinctrl.yaml.
I guess it's to allow the node names to sound more natural when there's
only one pin.

I am going to send a v2 with '-pins?$' but if you would prefer to have
'-pins$' that's fine. I don't mind either way.

Regards,
Aidan

>> +    $ref: /schemas/pinctrl/pinmux-node.yaml#
>> +
>> +    properties:
>> +      pins:
>> +        items:
>> +          enum:
>> +            - GPIO0
>> +            - GPIO1
>> +            - GPIO2
>> +            - GPIO3
>> +            - GPIO4
>> +            - N_RSTO
>> +
>> +      function:
>> +        enum:
>> +          - output
>> +          - input
>> +          - ldo
>> +          - pwm
>> +          - adc
>> +          - low_output
>> +          - floating
>> +          - ext_chg_ctl
>> +          - ldo_status
>> +
>> +required:
>> +  - compatible
>> +  - "#gpio-cells"
>> +  - gpio-controller
>> +
>> +additionalProperties: false
>> +
>> +...
>> -- 
>> 2.35.1
>> 
>> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux