[PATCH 06/10] arm64: dts: qcom: apq8016-sbc: add function and color to LED nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add common LED properties - the function and color - to LED nodes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 7c1eab605c15..3385cdf14a28 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -8,6 +8,7 @@
 #include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
@@ -116,6 +117,8 @@ leds {
 
 		led@1 {
 			label = "apq8016-sbc:green:user1";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
@@ -123,6 +126,8 @@ led@1 {
 
 		led@2 {
 			label = "apq8016-sbc:green:user2";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
@@ -130,6 +135,8 @@ led@2 {
 
 		led@3 {
 			label = "apq8016-sbc:green:user3";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
@@ -137,6 +144,7 @@ led@3 {
 
 		led@4 {
 			label = "apq8016-sbc:green:user4";
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 			panic-indicator;
@@ -145,6 +153,8 @@ led@4 {
 
 		led@5 {
 			label = "apq8016-sbc:yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
 			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
@@ -152,6 +162,8 @@ led@5 {
 
 		led@6 {
 			label = "apq8016-sbc:blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "bluetooth-power";
 			default-state = "off";
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux