Hi Andreas,
a few minor nits I saw..
On 22-06-04, Andreas Kemnade wrote:
...
> +&iomuxc {
I know that the DT is sorted alphabetical, except for the iomuxc node.
Very often this node is the last one to increase the readability of the
DT.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
Do we not have dedicated devices for those GPIOs, so you don't need the
hog group.
Regards,
Marco
> +
> + pinctrl_gpio_keys: gpio-keysgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059
> + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059
> + >;
> + };
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79
> + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
> + MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79
> + MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79
> + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
> + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
> + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
> + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
> + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
> + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
> + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
> + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
> + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
> + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
> + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
> + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
> + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
> + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
> + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
> + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
> + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
> + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
> + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
> + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
> + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
> + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
> + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
> + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
> + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
> + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
> + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
> + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
> + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
> + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_i2c1_sleep: i2c1-sleepgrp {
> + fsl,pins = <
> + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
> + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
> + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_i2c2_sleep: i2c2-sleepgrp {
> + fsl,pins = <
> + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
> + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
> + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_led: ledgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
> + >;
> + };
> +
> + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
> + fsl,pins = <
> + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
> + >;
> + };
> +
> + pinctrl_ricoh_gpio: ricoh-gpiogrp {
> + fsl,pins = <
> + MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
> + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
> + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
> + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
> + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
> + >;
> + };
> +
> + pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
> + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
> + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9
> + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9
> + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9
> + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
> + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
> + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
> + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
> + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
> + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
> + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
> + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
> + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
> + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
> + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
> + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
> + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
> + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
> + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
> + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
> + >;
> + };
> +
> + pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
> + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
> + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
> + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
> + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
> + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
> + >;
> + };
> +
> + pinctrl_wifi_power: wifi-powergrp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
> + >;
> + };
> +
> + pinctrl_wifi_reset: wifi-resetgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
> + >;
> + };
> +};
> +
> +®_vdd1p1 {
> + vin-supply = <&dcdc2_reg>;
> +};
> +
> +®_vdd2p5 {
> + vin-supply = <&dcdc2_reg>;
> +};
> +
> +®_arm {
> + vin-supply = <&dcdc3_reg>;
> +};
> +
> +®_soc {
> + vin-supply = <&dcdc1_reg>;
> +};
> +
> +®_pu {
> + vin-supply = <&dcdc1_reg>;
> +};
> +
> +&snvs_rtc {
> + /*
> + * We are using the RTC in the PMIC, but this one is not disabled
> + * in imx6sl.dtsi.
> + */
> + status = "disabled";
> +};
> +
> +&uart1 {
> + /* J4, through-holes */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart4 {
> + /* TP198, next to J4, SMD pads */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
> + pinctrl-3 = <&pinctrl_usdhc2_sleep>;
> + non-removable;
> + status = "okay";
> +
> + /* internal uSD card */
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + pinctrl-3 = <&pinctrl_usdhc3_sleep>;
> + vmmc-supply = <®_wifi>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + cap-power-off-card;
> + non-removable;
> + status = "okay";
> +
> + /*
> + * RTL8189F SDIO WiFi
> + */
> +};
> +
> +&usbotg1 {
> + disable-over-current;
> + srp-disable;
> + hnp-disable;
> + adp-disable;
> + status = "okay";
> +};
> --
> 2.30.2
>
>
>
