Le 07/06/2022 à 05:53, Neal Liu a écrit :
Le 06/06/2022 à 08:49, Neal Liu a écrit :
Add HACE crypto driver to support symmetric-key encryption and
decryption with multiple modes of operation.
Signed-off-by: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
Signed-off-by: Johnny Huang <johnny_huang@xxxxxxxxxxxxxx>
---
[...]
+static int aspeed_sk_transfer_sg(struct aspeed_hace_dev *hace_dev) {
+ struct aspeed_engine_crypto *crypto_engine =
&hace_dev->crypto_engine;
+ struct device *dev = hace_dev->dev;
+ struct aspeed_cipher_reqctx *rctx;
+ struct skcipher_request *req;
+
+ CIPHER_DBG(hace_dev, "\n");
+
+ req = skcipher_request_cast(crypto_engine->areq);
+ rctx = skcipher_request_ctx(req);
+
+ if (req->src == req->dst) {
+ dma_unmap_sg(dev, req->src, rctx->src_nents,
DMA_BIDIRECTIONAL);
+
Unneeded empty line.
Okay !
+ } else {
+ dma_unmap_sg(dev, req->src, rctx->src_nents, DMA_TO_DEVICE);
+ dma_unmap_sg(dev, req->dst, rctx->dst_nents,
DMA_FROM_DEVICE);
+ }
+
+ return aspeed_sk_complete(hace_dev, 0); }
+
[...]
+static int aspeed_sk_start_sg(struct aspeed_hace_dev *hace_dev) {
+ struct aspeed_engine_crypto *crypto_engine =
&hace_dev->crypto_engine;
+ struct aspeed_sg_list *src_list, *dst_list;
+ dma_addr_t src_dma_addr, dst_dma_addr;
+ struct aspeed_cipher_reqctx *rctx;
+ struct skcipher_request *req;
+ struct scatterlist *s;
+ int src_sg_len;
+ int dst_sg_len;
+ int total, i;
+ int rc;
+
+ CIPHER_DBG(hace_dev, "\n");
+
+ req = skcipher_request_cast(crypto_engine->areq);
+ rctx = skcipher_request_ctx(req);
+
+ rctx->enc_cmd |= HACE_CMD_DES_SG_CTRL |
HACE_CMD_SRC_SG_CTRL |
+ HACE_CMD_AES_KEY_HW_EXP |
HACE_CMD_MBUS_REQ_SYNC_EN;
+
+ /* BIDIRECTIONAL */
+ if (req->dst == req->src) {
+ src_sg_len = dma_map_sg(hace_dev->dev, req->src,
+ rctx->src_nents, DMA_BIDIRECTIONAL);
+ dst_sg_len = src_sg_len;
+ if (!src_sg_len) {
+ dev_warn(hace_dev->dev, "dma_map_sg() src error\n");
+ return -EINVAL;
+ }
+
+ } else {
+ src_sg_len = dma_map_sg(hace_dev->dev, req->src,
+ rctx->src_nents, DMA_TO_DEVICE);
+ if (!src_sg_len) {
+ dev_warn(hace_dev->dev, "dma_map_sg() src error\n");
+ return -EINVAL;
+ }
+
+ dst_sg_len = dma_map_sg(hace_dev->dev, req->dst,
+ rctx->dst_nents, DMA_FROM_DEVICE);
+ if (!dst_sg_len) {
+ dev_warn(hace_dev->dev, "dma_map_sg() dst error\n");
+ rc = -EINVAL;
+ goto free_req_src;
Should we realy call dma_unmap_sg() if dma_map_sg() fails?
This error handling is unmap() the above buffer (req->src), not really this buffer (req->dst).
I think it should.
You are right, I missread it. Sorry for the noise.
+ }
+ }
+
+ src_list = (struct aspeed_sg_list *)crypto_engine->cipher_addr;
+ src_dma_addr = crypto_engine->cipher_dma_addr;
+ total = req->cryptlen;
+
+ for_each_sg(req->src, s, src_sg_len, i) {
+ src_list[i].phy_addr = sg_dma_address(s);
+
+ /* last sg list */
+ if (sg_dma_len(s) >= total) {
+ src_list[i].len = total;
+ src_list[i].len |= BIT(31);
+ total = 0;
+ break;
+ }
+
+ src_list[i].len = sg_dma_len(s);
+ total -= src_list[i].len;
+ }
+
+ if (total != 0)
+ return -EINVAL;
goto free_req_src; ?
Yes, I miss this part. I'll revise it in next patch, thanks.
There is another one below...
+
+ if (req->dst == req->src) {
+ dst_list = src_list;
+ dst_dma_addr = src_dma_addr;
+
+ } else {
+ dst_list = (struct aspeed_sg_list *)crypto_engine->dst_sg_addr;
+ dst_dma_addr = crypto_engine->dst_sg_dma_addr;
+ total = req->cryptlen;
+
+ for_each_sg(req->dst, s, dst_sg_len, i) {
+ dst_list[i].phy_addr = sg_dma_address(s);
+
+ /* last sg list */
+ if (sg_dma_len(s) >= total) {
+ dst_list[i].len = total;
+ dst_list[i].len |= BIT(31);
+ total = 0;
+ break;
+ }
+
+ dst_list[i].len = sg_dma_len(s);
+ total -= dst_list[i].len;
+ }
+
+ dst_list[dst_sg_len].phy_addr = 0;
+ dst_list[dst_sg_len].len = 0;
+ }
+
+ if (total != 0)
+ return -EINVAL;
... here.
+
+ crypto_engine->resume = aspeed_sk_transfer_sg;
+
+ /* Dummy read for barriers */
+ readl(src_list);
+ readl(dst_list);
+
+ /* Trigger engines */
+ ast_hace_write(hace_dev, src_dma_addr, ASPEED_HACE_SRC);
+ ast_hace_write(hace_dev, dst_dma_addr, ASPEED_HACE_DEST);
+ ast_hace_write(hace_dev, req->cryptlen, ASPEED_HACE_DATA_LEN);
+ ast_hace_write(hace_dev, rctx->enc_cmd, ASPEED_HACE_CMD);
+
+ return -EINPROGRESS;
+
+free_req_src:
+ dma_unmap_sg(hace_dev->dev, req->src, rctx->src_nents,
+DMA_TO_DEVICE);
+
+ return rc;
+}
+
[...]
+static int aspeed_aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
+ unsigned int keylen)
+{
+ struct aspeed_cipher_ctx *ctx = crypto_skcipher_ctx(cipher);
+ struct aspeed_hace_dev *hace_dev = ctx->hace_dev;
+ struct crypto_aes_ctx gen_aes_key;
+
+ CIPHER_DBG(hace_dev, "keylen: %d bits\n", (keylen * 8));
+
+ if (keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_192 &&
+ keylen != AES_KEYSIZE_256)
+ return -EINVAL;
+
+ if (ctx->hace_dev->version == AST2500_VERSION) {
+ aes_expandkey(&gen_aes_key, key, keylen);
+ memcpy(ctx->key, gen_aes_key.key_enc, AES_MAX_KEYLENGTH);
+
Unneeded empty line
Okay !
+ } else {
+ memcpy(ctx->key, key, keylen);
+ }
+
+ ctx->key_len = keylen;
+
+ return 0;
+}
+
[...]
+ crypto_engine->cipher_ctx =
+ dma_alloc_coherent(&pdev->dev,
+ PAGE_SIZE,
+ &crypto_engine->cipher_ctx_dma,
+ GFP_KERNEL);
+ if (!crypto_engine->cipher_ctx) {
+ dev_err(&pdev->dev, "Failed to allocate cipher ctx dma\n");
+ rc = -ENOMEM;
+ goto free_hash_src;
+ }
+
+ crypto_engine->cipher_addr =
+ dma_alloc_coherent(&pdev->dev,
+ ASPEED_CRYPTO_SRC_DMA_BUF_LEN,
+ &crypto_engine->cipher_dma_addr,
+ GFP_KERNEL);
+ if (!crypto_engine->cipher_addr) {
+ dev_err(&pdev->dev, "Failed to allocate cipher addr dma\n");
+ rc = -ENOMEM;
+ goto free_cipher_ctx;
+ }
+
+ if (hace_dev->version == AST2600_VERSION) {
+ crypto_engine->dst_sg_addr =
+ dma_alloc_coherent(&pdev->dev,
+ ASPEED_CRYPTO_DST_DMA_BUF_LEN,
+ &crypto_engine->dst_sg_dma_addr,
+ GFP_KERNEL);
+ if (!crypto_engine->dst_sg_addr) {
+ dev_err(&pdev->dev, "Failed to allocate dst_sg dma\n");
+ rc = -ENOMEM;
+ goto free_cipher_addr;
+ }
+ }
+
rc = aspeed_hace_register(hace_dev);
if (rc) {
dev_err(&pdev->dev, "Failed to register algs, rc:0x%x\n", rc);
I guess that the new dma_alloc_coherent() just a few lines above should also
be undone in error hanfling path if aspeed_hace_register() fails?
I'll remove the return value (rc) since it's useless here. So no need error handling on this part.
I'll revise it in next patch, thanks.
@@ -179,6 +282,18 @@ static int aspeed_hace_probe(struct
platform_device *pdev)
return 0;
+free_cipher_addr:
+ dma_free_coherent(&pdev->dev, ASPEED_CRYPTO_SRC_DMA_BUF_LEN,
+ crypto_engine->cipher_addr,
+ crypto_engine->cipher_dma_addr);
+free_cipher_ctx:
+ dma_free_coherent(&pdev->dev, PAGE_SIZE,
+ crypto_engine->cipher_ctx,
+ crypto_engine->cipher_ctx_dma);
+free_hash_src:
+ dma_free_coherent(&pdev->dev, ASPEED_HASH_SRC_DMA_BUF_LEN,
+ hash_engine->ahash_src_addr,
+ hash_engine->ahash_src_dma_addr);
end:
clk_disable_unprepare(hace_dev->clk);
return rc;
