Re: [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Rob,

On 06/06/22 04:13, Rob Herring wrote:
> On Thu, Jun 02, 2022 at 05:15:56PM +0530, Siddharth Vadapalli wrote:
>> Update bindings for TI K3 J7200 SoC which contains 5 ports (4 external
>> ports) CPSW5G module and add compatible for it.
>>
>> Changes made:
>>     - Add new compatible ti,j7200-cpswxg-nuss for CPSW5G.
>>     - Extend pattern properties for new compatible.
>>     - Change maximum number of CPSW ports to 4 for new compatible.
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
>> ---
>>  .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 140 ++++++++++++------
>>  1 file changed, 98 insertions(+), 42 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> index b8281d8be940..ec57bde7ac26 100644
>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> @@ -57,6 +57,7 @@ properties:
>>        - ti,am654-cpsw-nuss
>>        - ti,j721e-cpsw-nuss
>>        - ti,am642-cpsw-nuss
>> +      - ti,j7200-cpswxg-nuss
>>  
>>    reg:
>>      maxItems: 1
>> @@ -108,48 +109,103 @@ properties:
>>          const: 1
>>        '#size-cells':
>>          const: 0
>> -
>> -    patternProperties:
>> -      port@[1-2]:
>> -        type: object
>> -        description: CPSWxG NUSS external ports
>> -
>> -        $ref: ethernet-controller.yaml#
>> -
>> -        properties:
>> -          reg:
>> -            minimum: 1
>> -            maximum: 2
>> -            description: CPSW port number
>> -
>> -          phys:
>> -            maxItems: 1
>> -            description: phandle on phy-gmii-sel PHY
>> -
>> -          label:
>> -            description: label associated with this port
>> -
>> -          ti,mac-only:
>> -            $ref: /schemas/types.yaml#/definitions/flag
>> -            description:
>> -              Specifies the port works in mac-only mode.
>> -
>> -          ti,syscon-efuse:
>> -            $ref: /schemas/types.yaml#/definitions/phandle-array
>> -            items:
>> -              - items:
>> -                  - description: Phandle to the system control device node which
>> -                      provides access to efuse
>> -                  - description: offset to efuse registers???
>> -            description:
>> -              Phandle to the system control device node which provides access
>> -              to efuse IO range with MAC addresses
>> -
>> -        required:
>> -          - reg
>> -          - phys
>> -
>> -    additionalProperties: false
>> +    allOf:
>> +      - if:
>> +          properties:
>> +            compatible:
>> +              contains:
>> +                enum:
>> +                  - ti,am654-cpsw-nuss
>> +                  - ti,j721e-cpsw-nuss
>> +                  - ti,am642-cpsw-nuss
>> +        then:
>> +          patternProperties:
>> +            port@[1-2]:
>> +              type: object
>> +              description: CPSWxG NUSS external ports
>> +
>> +              $ref: ethernet-controller.yaml#
>> +
>> +              properties:
>> +                reg:
>> +                  minimum: 1
>> +                  maximum: 2
>> +                  description: CPSW port number
>> +
>> +                phys:
>> +                  maxItems: 1
>> +                  description: phandle on phy-gmii-sel PHY
>> +
>> +                label:
>> +                  description: label associated with this port
>> +
>> +                ti,mac-only:
>> +                  $ref: /schemas/types.yaml#/definitions/flag
>> +                  description:
>> +                    Specifies the port works in mac-only mode.
>> +
>> +                ti,syscon-efuse:
>> +                  $ref: /schemas/types.yaml#/definitions/phandle-array
>> +                  items:
>> +                    - items:
>> +                        - description: Phandle to the system control device node which
>> +                            provides access to efuse
>> +                        - description: offset to efuse registers???
>> +                  description:
>> +                    Phandle to the system control device node which provides access
>> +                    to efuse IO range with MAC addresses
>> +
>> +              required:
>> +                - reg
>> +                - phys
>> +      - if:
>> +          properties:
>> +            compatible:
>> +              contains:
>> +                enum:
>> +                  - ti,j7200-cpswxg-nuss
>> +        then:
>> +          patternProperties:
>> +            port@[1-4]:
>> +              type: object
>> +              description: CPSWxG NUSS external ports
>> +
>> +              $ref: ethernet-controller.yaml#
>> +
>> +              properties:
>> +                reg:
>> +                  minimum: 1
>> +                  maximum: 4
>> +                  description: CPSW port number
>> +
>> +                phys:
>> +                  maxItems: 1
>> +                  description: phandle on phy-gmii-sel PHY
>> +
>> +                label:
>> +                  description: label associated with this port
>> +
>> +                ti,mac-only:
>> +                  $ref: /schemas/types.yaml#/definitions/flag
>> +                  description:
>> +                    Specifies the port works in mac-only mode.
>> +
>> +                ti,syscon-efuse:
>> +                  $ref: /schemas/types.yaml#/definitions/phandle-array
>> +                  items:
>> +                    - items:
>> +                        - description: Phandle to the system control device node which
>> +                            provides access to efuse
>> +                        - description: offset to efuse registers???
>> +                  description:
>> +                    Phandle to the system control device node which provides access
>> +                    to efuse IO range with MAC addresses
>> +
>> +              required:
>> +                - reg
>> +                - phys
> 
> You are now defining the same properties twice. Don't do that. Just add 
> an if/then schema restrict port nodes.

Thank you for reviewing the patch. I will fix this and send v3 for this series.

Thanks,
Siddharth.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux