Runtime PM doesn't seem to work correctly on this driver. On top of that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the driver's PM ops were not hooked-up. So, in order to support regular operation with V3D on BCM2711 (Raspberry Pi 4), get rid of the PM code. PM will be reinstated once we figure out the underlying issues. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> Signed-off-by: Peter Robinson <pbrobinson@xxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javierm@xxxxxxxxxx> --- Changes since v4: - Rebase Changes since v3: - Minor updates for rebase drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +----------------- drivers/gpu/drm/v3d/v3d_drv.c | 11 ----------- drivers/gpu/drm/v3d/v3d_gem.c | 12 +----------- 3 files changed, 2 insertions(+), 39 deletions(-) diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c index 29fd13109e43..efbde124c296 100644 --- a/drivers/gpu/drm/v3d/v3d_debugfs.c +++ b/drivers/gpu/drm/v3d/v3d_debugfs.c @@ -4,7 +4,6 @@ #include <linux/circ_buf.h> #include <linux/ctype.h> #include <linux/debugfs.h> -#include <linux/pm_runtime.h> #include <linux/seq_file.h> #include <linux/string_helpers.h> @@ -131,11 +130,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused) struct drm_device *dev = node->minor->dev; struct v3d_dev *v3d = to_v3d_dev(dev); u32 ident0, ident1, ident2, ident3, cores; - int ret, core; - - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; + int core; ident0 = V3D_READ(V3D_HUB_IDENT0); ident1 = V3D_READ(V3D_HUB_IDENT1); @@ -188,9 +183,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused) (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0); } - pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); - return 0; } @@ -218,11 +210,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused) uint32_t cycles; int core = 0; int measure_ms = 1000; - int ret; - - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; if (v3d->ver >= 40) { V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3, @@ -246,9 +233,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused) cycles / (measure_ms * 1000), (cycles / (measure_ms * 100)) % 10); - pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); - return 0; } diff --git a/drivers/gpu/drm/v3d/v3d_drv.c b/drivers/gpu/drm/v3d/v3d_drv.c index 1afcd54fbbd5..56d5f831e48b 100644 --- a/drivers/gpu/drm/v3d/v3d_drv.c +++ b/drivers/gpu/drm/v3d/v3d_drv.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> #include <linux/reset.h> #include <drm/drm_drv.h> @@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data, { struct v3d_dev *v3d = to_v3d_dev(dev); struct drm_v3d_get_param *args = data; - int ret; static const u32 reg_map[] = { [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG, [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1, @@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data, if (args->value != 0) return -EINVAL; - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - return ret; if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 && args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) { args->value = V3D_CORE_READ(0, offset); } else { args->value = V3D_READ(offset); } - pm_runtime_mark_last_busy(v3d->drm.dev); - pm_runtime_put_autosuspend(v3d->drm.dev); return 0; } @@ -280,10 +273,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev) return -ENOMEM; } - pm_runtime_use_autosuspend(dev); - pm_runtime_set_autosuspend_delay(dev, 50); - pm_runtime_enable(dev); - ret = v3d_gem_init(drm); if (ret) goto dma_free; diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c index 92bc0faee84f..7026214a09f0 100644 --- a/drivers/gpu/drm/v3d/v3d_gem.c +++ b/drivers/gpu/drm/v3d/v3d_gem.c @@ -6,7 +6,6 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/sched/signal.h> #include <linux/uaccess.h> @@ -367,9 +366,6 @@ v3d_job_free(struct kref *ref) dma_fence_put(job->irq_fence); dma_fence_put(job->done_fence); - pm_runtime_mark_last_busy(job->v3d->drm.dev); - pm_runtime_put_autosuspend(job->v3d->drm.dev); - if (job->perfmon) v3d_perfmon_put(job->perfmon); @@ -471,14 +467,10 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, job->v3d = v3d; job->free = free; - ret = pm_runtime_get_sync(v3d->drm.dev); - if (ret < 0) - goto fail; - ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue], v3d_priv); if (ret) - goto fail_job; + goto fail; if (has_multisync) { if (se->in_sync_count && se->wait_stage == queue) { @@ -509,8 +501,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv, fail_deps: drm_sched_job_cleanup(&job->base); -fail_job: - pm_runtime_put_autosuspend(v3d->drm.dev); fail: kfree(*container); *container = NULL; -- 2.36.1