Re: [PATCH v5 4/6] ARM: dts: bcm2711: Enable V3D

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

Am 01.06.22 um 13:02 schrieb Peter Robinson:
This adds the entry for V3D for bcm2711 (used in the Raspberry Pi 4)
and the associated firmware clock entry.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Signed-off-by: Peter Robinson <pbrobinson@xxxxxxxxx>
---
Changes since v5:
- Move the firmware clock to bcm2711-rpi.dtsi

  arch/arm/boot/dts/bcm2711-rpi.dtsi |  4 ++++
  arch/arm/boot/dts/bcm2711.dtsi     | 11 +++++++++++
  2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..98817a6675b9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -69,6 +69,10 @@ blconfig: nvram@0 {
  	};
  };
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
  &vchiq {
  	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
  };
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 89af57482bc8..177662257b16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -601,6 +601,17 @@ genet_mdio: mdio@e14 {
  				#size-cells = <0x0>;
  			};
  		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,bcm2711-v3d";

unfortunately this doesn't match with patch #3 anymore. Except of this everything looks good here.

Stefan

+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
  	};
  };



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux