Re: [PATCH v4 3/3] misc: uwb: nxp: sr1xx: UWB driver support for sr1xx series chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 28, 2022 at 12:13:51AM +0530, Manjunatha Venkatesh wrote:
> Ultra-wideband (UWB) is a short-range wireless communication protocol.
> 
> NXP has SR1XX family of UWB Subsystems (UWBS) devices. SR1XX SOCs
> are FiRa Compliant. SR1XX SOCs are flash less devices and they need
> Firmware Download on every device boot. More details on the SR1XX Family
> can be found at https://www.nxp.com/products/:UWB-TRIMENSION
> 
> The sr1xx driver work the SR1XX Family of UWBS, and uses UWB Controller
> Interface (UCI).  The corresponding details are available in the FiRa
> Consortium Website (https://www.firaconsortium.org/).
> 
> Internally driver will handle two modes of operation.
> 1.HBCI mode (sr1xx BootROM Code Interface)
> Firmware download uses HBCI ptotocol packet structure which is
> Nxp proprietary,Firmware File(.bin) stored in user space context
> and during device init sequence pick the firmware packet in chunk
> and send it to the driver with write() api call.
> 
> After the firmware download sequence at the end UWBS will
> send device status notification and its indication of device entered
> UCI mode.
> Here after any command/response/notification will follow
> UCI packet structure.
> 
> 2.UCI mode (UWB Command interface)
> Once Firmware download finishes sr1xx will switch to UCI mode.
> Then driver exchange command/response/notification as per the FIRA UCI
> standard format between user space and sr1xx device.
> Any response or notification received from sr1xx through SPI line
> will convey to user space.
> 
> Its Interrupt based driver and IO Handshake needed with SR1XX Family of
> SOCs.
> This driver needs dts config update as per the sr1xx data sheet.
> Corresponding document available in Documentation/devicetree/bindings/uwb
> 
> Message-ID: <20220504171337.3416983-1-manjunatha.venkatesh@xxxxxxx>
> Signed-off-by: Manjunatha Venkatesh <manjunatha.venkatesh@xxxxxxx>
> ---
> Changes since v3:
>   - Commit Message Description updated
>   - Renamed file from sr1xx.c to nxp-sr1xx.c
>   - Removed unwanted header files
>   - Removed sr1xx.h file since its not required for single source file

For some reason you seem to have ignored many of my review requests of
your previous submission.  Because of that, I'll just drop this series
and wait for a version that addresses those issues as they are still
present here, making this submission impossible to accept.

thanks,

greg k-h



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux