On Wed, Jun 01, 2022 at 12:17:47AM -0500, Max Fierke wrote: > The CWD686 is a 6.86" IPS LCD panel used as the primary > display in the ClockworkPi DevTerm portable (all cores) > > Signed-off-by: Max Fierke <max@xxxxxxxxxxxxx> > --- > .../display/panel/clockworkpi,cwd686.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml You probably can simply add this to panel-simple-dsi.yaml. It mainly depends on how many power supplies this panel has. > > diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > new file mode 100644 > index 000000000000..935a33b9305f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ClockworkPi CWD686 6.86" IPS LCD panel > + > +maintainers: > + - Max Fierke <max@xxxxxxxxxxxxx> > + > +description: | > + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the > + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 > + resolution and uses 24 bit RGB per pixel. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: clockworkpi,cwd686 > + > + reg: > + description: DSI virtual channel used by that screen > + maxItems: 1 > + > + reset-gpios: true > + rotation: true > + backlight: true > + > +required: > + - compatible > + - reg > + - backlight > + - reset-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + backlight: backlight { > + compatible = "gpio-backlight"; > + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; > + }; > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "clockworkpi,cwd686"; > + reg = <0>; > + backlight = <&backlight>; > + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; > + rotation = <90>; > + }; > + }; > -- > 2.36.1 > >