Re: [PATCH 1/2] ARM: dts: sti: adjust whitespace around '='

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof

On 5/26/22 22:36, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 
> ---

Reviewed-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>

Thanks


> 
> Output compared with dtx_diff and fdtdump.
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
>  arch/arm/boot/dts/stih407.dtsi        |   4 +-
>  arch/arm/boot/dts/stih410.dtsi        |   4 +-
>  arch/arm/boot/dts/stihxxx-b2120.dtsi  |   8 +-
>  4 files changed, 95 insertions(+), 95 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 1713f7878117..33cf54cb46cc 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
>  	};
>  
>  	irq-syscfg {
> -		compatible    = "st,stih407-irq-syscfg";
> -		st,syscfg     = <&syscfg_core>;
> +		compatible = "st,stih407-irq-syscfg";
> +		st,syscfg = <&syscfg_core>;
>  		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
>  				<ST_IRQ_SYSCFG_PMU_1>;
>  		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
> @@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
>  	miphy28lp_phy: miphy28lp {
>  		compatible = "st,miphy28lp-phy";
>  		st,syscfg = <&syscfg_core>;
> -		#address-cells	= <1>;
> -		#size-cells	= <1>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
>  		ranges;
>  
>  		phy_port0: port@9b22000 {
> @@ -208,26 +208,26 @@ phy_port2: port@8f95000 {
>  	};
>  
>  	st231_gp0: st231-gp0 {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&gp0_reserved>;
> -		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x22c>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&gp0_reserved>;
> +		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x22c>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
>  	};
>  
>  	st231_delta: st231-delta {
> -		compatible	= "st,st231-rproc";
> -		memory-region	= <&delta_reserved>;
> -		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
> -		reset-names	= "sw_reset";
> -		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
> -		clock-frequency	= <600000000>;
> -		st,syscfg	= <&syscfg_core 0x224>;
> +		compatible = "st,st231-rproc";
> +		memory-region = <&delta_reserved>;
> +		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
> +		reset-names = "sw_reset";
> +		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
> +		clock-frequency = <600000000>;
> +		st,syscfg = <&syscfg_core 0x224>;
>  		#mbox-cells = <1>;
>  		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
>  		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
> @@ -710,78 +710,78 @@ sata1: sata@9b28000 {
>  
>  
>  		st_dwc3: dwc3@8f94000 {
> -			compatible	= "st,stih407-dwc3";
> -			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
> -			reg-names	= "reg-glue", "syscfg-reg";
> -			st,syscfg	= <&syscfg_core>;
> -			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
> -					  <&softreset STIH407_MIPHY2_SOFTRESET>;
> -			reset-names	= "powerdown", "softreset";
> -			#address-cells	= <1>;
> -			#size-cells	= <1>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_usb3>;
> +			compatible = "st,stih407-dwc3";
> +			reg = <0x08f94000 0x1000>, <0x110 0x4>;
> +			reg-names = "reg-glue", "syscfg-reg";
> +			st,syscfg = <&syscfg_core>;
> +			resets = <&powerdown STIH407_USB3_POWERDOWN>,
> +				 <&softreset STIH407_MIPHY2_SOFTRESET>;
> +			reset-names = "powerdown", "softreset";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usb3>;
>  			ranges;
>  
>  			status = "disabled";
>  
>  			dwc3: dwc3@9900000 {
> -				compatible	= "snps,dwc3";
> -				reg		= <0x09900000 0x100000>;
> -				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> -				dr_mode		= "host";
> -				phy-names	= "usb2-phy", "usb3-phy";
> -				phys		= <&usb2_picophy0>,
> -						  <&phy_port2 PHY_TYPE_USB3>;
> +				compatible = "snps,dwc3";
> +				reg = <0x09900000 0x100000>;
> +				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> +				dr_mode = "host";
> +				phy-names = "usb2-phy", "usb3-phy";
> +				phys = <&usb2_picophy0>,
> +				       <&phy_port2 PHY_TYPE_USB3>;
>  				snps,dis_u3_susphy_quirk;
>  			};
>  		};
>  
>  		/* COMMS PWM Module */
>  		pwm0: pwm@9810000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9810000 0x68>;
> -			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9810000 0x68>;
> +			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <1>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		/* SBC PWM Module */
>  		pwm1: pwm@9510000 {
> -			compatible	= "st,sti-pwm";
> -			#pwm-cells	= <2>;
> -			reg		= <0x9510000 0x68>;
> -			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> -			pinctrl-names	= "default";
> -			pinctrl-0	= <&pinctrl_pwm1_chan0_default
> -					&pinctrl_pwm1_chan1_default
> -					&pinctrl_pwm1_chan2_default
> -					&pinctrl_pwm1_chan3_default>;
> -			clock-names	= "pwm";
> -			clocks		= <&clk_sysin>;
> +			compatible = "st,sti-pwm";
> +			#pwm-cells = <2>;
> +			reg = <0x9510000 0x68>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pwm1_chan0_default
> +				     &pinctrl_pwm1_chan1_default
> +				     &pinctrl_pwm1_chan2_default
> +				     &pinctrl_pwm1_chan3_default>;
> +			clock-names = "pwm";
> +			clocks = <&clk_sysin>;
>  			st,pwm-num-chan = <4>;
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		rng10: rng@8a89000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a89000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a89000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		rng11: rng@8a8a000 {
> -			compatible      = "st,rng";
> -			reg		= <0x08a8a000 0x1000>;
> -			clocks          = <&clk_sysin>;
> -			status		= "okay";
> +			compatible = "st,rng";
> +			reg = <0x08a8a000 0x1000>;
> +			clocks = <&clk_sysin>;
> +			status = "okay";
>  		};
>  
>  		ethernet0: dwmac@9630000 {
> @@ -812,36 +812,36 @@ ethernet0: dwmac@9630000 {
>  		};
>  
>  		mailbox0: mailbox@8f00000  {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f00000 0x1000>;
> -			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "a9";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f00000 0x1000>;
> +			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <2>;
> +			mbox-name = "a9";
> +			status = "okay";
>  		};
>  
>  		mailbox1: mailbox@8f01000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f01000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_1";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f01000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_1";
> +			status = "okay";
>  		};
>  
>  		mailbox2: mailbox@8f02000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f02000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_gp_0";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f02000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_gp_0";
> +			status = "okay";
>  		};
>  
>  		mailbox3: mailbox@8f03000 {
> -			compatible	= "st,stih407-mailbox";
> -			reg		= <0x8f03000 0x1000>;
> -			#mbox-cells	= <2>;
> -			mbox-name	= "st231_audio_video";
> -			status		= "okay";
> +			compatible = "st,stih407-mailbox";
> +			reg = <0x8f03000 0x1000>;
> +			#mbox-cells = <2>;
> +			mbox-name = "st231_audio_video";
> +			status = "okay";
>  		};
>  
>  		/* fdma audio */
> @@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
>  			dmas = <&fdma0 2 0 1>;
>  			dma-names = "tx";
>  
> -			status		= "disabled";
> +			status = "disabled";
>  		};
>  
>  		sti_uni_player1: sti-uni-player@8d81000 {
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 9e212b0af89d..aca43d2bdaad 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -13,7 +13,7 @@ sti-display-subsystem@0 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index ce2f62cf129b..a39dd5f7bcae 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -105,7 +105,7 @@ sti-display-subsystem@0 {
>  			#size-cells = <1>;
>  
>  			reg = <0 0>;
> -			assigned-clocks	= <&clk_s_d2_quadfs 0>,
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
>  					  <&clk_s_d2_quadfs 1>,
>  					  <&clk_s_c0_pll1 0>,
>  					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> @@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi@8d04000 {
>  				reg-names = "hdmi-reg";
>  				#sound-dai-cells = <0>;
>  				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> -				interrupt-names	= "irq";
> +				interrupt-names = "irq";
>  				clock-names = "pix",
>  					      "tmds",
>  					      "phy",
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 4c72dedcd1be..2aa94605d3d4 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -175,11 +175,11 @@ demux@8a20000 {
>  
>  			/* tsin0 is TSA on NIMA */
>  			tsin0: port {
> -				tsin-num	= <0>;
> +				tsin-num = <0>;
>  				serial-not-parallel;
> -				i2c-bus		= <&ssc2>;
> -				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
> -				dvb-card	= <STV0367_TDA18212_NIMA_1>;
> +				i2c-bus = <&ssc2>;
> +				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
> +				dvb-card = <STV0367_TDA18212_NIMA_1>;
>  			};
>  		};
>  



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux