Hi Alistair,
On 5/25/22 6:55 AM, Alistair Francis wrote:
> Connect the dispaly on the reMarkable2.
>
> Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/imx7d-remarkable2.dts | 74 +++++++++++++++++++++++++
> 1 file changed, 74 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> index 99ac0d242936..03a4029e1e57 100644
> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> @@ -68,6 +68,16 @@ reg_digitizer: regulator-digitizer {
> startup-delay-us = <100000>; /* 100 ms */
> };
>
> + reg_sdoe: regulator-sdoe {
> + compatible = "regulator-fixed";
> + regulator-name = "SDOE";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_sdoe_reg>;
> + pinctrl-1 = <&pinctrl_sdoe_reg>;
> + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> wifi_pwrseq: wifi_pwrseq {
> compatible = "mmc-pwrseq-simple";
> pinctrl-names = "default";
> @@ -76,6 +86,16 @@ wifi_pwrseq: wifi_pwrseq {
> clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
> clock-names = "ext_clock";
> };
> +
> + panel {
> + compatible = "eink,vb3300-kca";
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
>From the discussion at [1], this is not safe to merge. It exposes an
electrophoretic display to fbcon/userspace as if it was an LCD, which it very
much is not. Trying to write RGB pixel data to the panel could damage it.
So at the very least before hooking this up, the LCD controller has to know that
the EPD needs special handling and that it cannot accept RGB.
That doesn't necessarily mean there is a problem with the content of this patch
-- the special handling may all be taken care of based on the compatible string
-- but I think it's a really bad idea to merge this with how "eink,vb3300-kca"
is currently represented in panel-simple.
Regards,
Samuel
[1]: https://lore.kernel.org/lkml/Yo5kz%2F9cSd6ewC5f@phenom.ffwll.local/
> };
>
> &clks {
> @@ -132,6 +152,20 @@ reg_epdpmic: vcom {
> };
> };
>
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif>;
> + lcd-supply = <®_epdpmic>;
> + lcd2-supply = <®_sdoe>;
> + status = "okay";
> +
> + port {
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +};
> +
> &snvs_pwrkey {
> status = "okay";
> };
> @@ -246,6 +280,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
> >;
> };
>
> + pinctrl_lcdif: lcdifgrp {
> + fsl,pins = <
> + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
> + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
> + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
> + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
> + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
> + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
> + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
> + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
> + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
> + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
> + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
> + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
> + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
> + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
> + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
> + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
> +
> + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
> + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
> + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
> + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
> + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
> +
> + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
> + MX7D_PAD_LCD_CLK__LCD_CLK 0x79
> + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
> + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
> + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
> + MX7D_PAD_LCD_RESET__LCD_RESET 0x79
> + >;
> + };
> +
> + pinctrl_sdoe_reg: sdoereggrp {
> + fsl,pins = <
> + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
>
