> Subject: [PATCH 1/7] ARM: dts: s3c2410: use local header for pinctrl > register values > > The DTS uses hardware register values directly in pin controller pin > configuration. These are not some IDs or other abstraction layer but raw > numbers used in the registers. > > These numbers were previously put in the bindings header to avoid code > duplication and to provide some context meaning (name), but they do not > fit the purpose of bindings. It is also quite confusing to use constants > prefixed with Exynos for other SoC, because there is actually nothing here > in common, except the actual value. > > Store the constants in a header next to DTS and use them instead of > bindings. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > --- > arch/arm/boot/dts/s3c2410-pinctrl.h | 19 +++++++++++++ > arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +++++++++++++------------- > 2 files changed, 38 insertions(+), 19 deletions(-) create mode 100644 > arch/arm/boot/dts/s3c2410-pinctrl.h > > diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h > b/arch/arm/boot/dts/s3c2410-pinctrl.h > new file mode 100644 > index 000000000000..71cb0ac815b3 > --- /dev/null > +++ b/arch/arm/boot/dts/s3c2410-pinctrl.h > @@ -0,0 +1,19 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Samsung's Exynos pinctrl bindings "Exynos" -> "s3c2410" Best Regards, Chanho Park > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * Copyright (c) 2022 Linaro Ltd > + * Author: Krzysztof Kozlowski <krzk@xxxxxxxxxx> */ > + > +#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ > +#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ > + > +#define S3C2410_PIN_FUNC_INPUT 0 > +#define S3C2410_PIN_FUNC_OUTPUT 1 > +#define S3C2410_PIN_FUNC_2 2 > +#define S3C2410_PIN_FUNC_3 3 > + > +#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */ > diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi > b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi > index 20a7d72827c2..3268366bd8bc 100644 > --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi > +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi > @@ -5,7 +5,7 @@ > * Copyright (c) 2013 Heiko Stuebner <heiko@xxxxxxxxx> > */ > > -#include <dt-bindings/pinctrl/samsung.h> > +#include "s3c2410-pinctrl.h" > > &pinctrl_0 { > /* > @@ -82,91 +82,91 @@ gpm: gpm-gpio-bank { > > uart0_data: uart0-data-pins { > samsung,pins = "gph-0", "gph-1"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart0_fctl: uart0-fctl-pins { > samsung,pins = "gph-8", "gph-9"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart1_data: uart1-data-pins { > samsung,pins = "gph-2", "gph-3"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart1_fctl: uart1-fctl-pins { > samsung,pins = "gph-10", "gph-11"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart2_data: uart2-data-pins { > samsung,pins = "gph-4", "gph-5"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart2_fctl: uart2-fctl-pins { > samsung,pins = "gph-6", "gph-7"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > uart3_data: uart3-data-pins { > samsung,pins = "gph-6", "gph-7"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > extuart_clk: extuart-clk-pins { > samsung,pins = "gph-12"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > i2c0_bus: i2c0-bus-pins { > samsung,pins = "gpe-14", "gpe-15"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > spi0_bus: spi0-bus-pins { > samsung,pins = "gpe-11", "gpe-12", "gpe-13"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd0_clk: sd0-clk-pins { > samsung,pins = "gpe-5"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd0_cmd: sd0-cmd-pins { > samsung,pins = "gpe-6"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd0_bus1: sd0-bus1-pins { > samsung,pins = "gpe-7"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd0_bus4: sd0-bus4-pins { > samsung,pins = "gpe-8", "gpe-9", "gpe-10"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd1_cmd: sd1-cmd-pins { > samsung,pins = "gpl-8"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd1_clk: sd1-clk-pins { > samsung,pins = "gpl-9"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd1_bus1: sd1-bus1-pins { > samsung,pins = "gpl-0"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > > sd1_bus4: sd1-bus4-pins { > samsung,pins = "gpl-1", "gpl-2", "gpl-3"; > - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; > + samsung,pin-function = <S3C2410_PIN_FUNC_2>; > }; > }; > -- > 2.34.1
