On 24.05.22 21:34, Saravana Kannan wrote:
Hello all
"
On Tue, May 24, 2022 at 9:01 AM Rob Herring <robh@xxxxxxxxxx> wrote:
+Saravana
On Mon, May 23, 2022 at 06:58:13PM -0700, Stefano Stabellini wrote:
On Mon, 23 May 2022, Oleksandr wrote:
On Thu, 19 May 2022, Oleksandr wrote:
On Wed, May 18, 2022 at 5:06 PM Oleksandr <olekstysh@xxxxxxxxx> wrote:
On 18.05.22 17:32, Arnd Bergmann wrote:
On Sat, May 7, 2022 at 7:19 PM Oleksandr Tyshchenko
<olekstysh@xxxxxxxxx> wrote:
This would mean having a device
node for the grant-table mechanism that can be referred to using
the
'iommus'
phandle property, with the domid as an additional argument.
I assume, you are speaking about something like the following?
xen_dummy_iommu {
compatible = "xen,dummy-iommu";
#iommu-cells = <1>;
};
virtio@3000 {
compatible = "virtio,mmio";
reg = <0x3000 0x100>;
interrupts = <41>;
/* The device is located in Xen domain with ID 1 */
iommus = <&xen_dummy_iommu 1>;
};
Right, that's that's the idea,
thank you for the confirmation
except I would not call it a 'dummy'.
From the perspective of the DT, this behaves just like an IOMMU,
even if the exact mechanism is different from most hardware IOMMU
implementations.
well, agree
It does not quite fit the model that Linux currently uses for
iommus,
as that has an allocator for dma_addr_t space
yes (# 3/7 adds grant-table based allocator)
, but it would think it's
conceptually close enough that it makes sense for the binding.
Interesting idea. I am wondering, do we need an extra actions for
this
to work in Linux guest (dummy IOMMU driver, etc)?
It depends on how closely the guest implementation can be made to
resemble a normal iommu. If you do allocate dma_addr_t addresses,
it may actually be close enough that you can just turn the grant-table
code into a normal iommu driver and change nothing else.
Unfortunately, I failed to find a way how use grant references at the
iommu_ops level (I mean to fully pretend that we are an IOMMU driver). I
am
not too familiar with that, so what is written below might be wrong or
at
least not precise.
The normal IOMMU driver in Linux doesn’t allocate DMA addresses by
itself, it
just maps (IOVA-PA) what was requested to be mapped by the upper layer.
The
DMA address allocation is done by the upper layer (DMA-IOMMU which is
the glue
layer between DMA API and IOMMU API allocates IOVA for PA?). But, all
what we
need here is just to allocate our specific grant-table based DMA
addresses
(DMA address = grant reference + offset in the page), so let’s say we
need an
entity to take a physical address as parameter and return a DMA address
(what
actually commit #3/7 is doing), and that’s all. So working at the
dma_ops
layer we get exactly what we need, with the minimal changes to guest
infrastructure. In our case the Xen itself acts as an IOMMU.
Assuming that we want to reuse the IOMMU infrastructure somehow for our
needs.
I think, in that case we will likely need to introduce a new specific
IOVA
allocator (alongside with a generic one) to be hooked up by the
DMA-IOMMU
layer if we run on top of Xen. But, even having the specific IOVA
allocator to
return what we indeed need (DMA address = grant reference + offset in
the
page) we will still need the specific minimal required IOMMU driver to
be
present in the system anyway in order to track the mappings(?) and do
nothing
with them, returning a success (this specific IOMMU driver should have
all
mandatory callbacks implemented).
I completely agree, it would be really nice to reuse generic IOMMU
bindings
rather than introducing Xen specific property if what we are trying to
implement in current patch series fits in the usage of "iommus" in Linux
more-less. But, if we will have to add more complexity/more components
to the
code for the sake of reusing device tree binding, this raises a question
whether that’s worthwhile.
Or I really missed something?
I think Arnd was primarily suggesting to reuse the IOMMU Device Tree
bindings, not necessarily the IOMMU drivers framework in Linux (although
that would be an added bonus.)
I know from previous discussions with you that making the grant table
fit in the existing IOMMU drivers model is difficult, but just reusing
the Device Tree bindings seems feasible?
I started experimenting with that. As wrote in a separate email, I got a
deferred probe timeout,
after inserting required nodes into guest device tree, which seems to be a
consequence of the unavailability of IOMMU, I will continue to investigate
this question.
I have experimented with that. Yes, just reusing the Device Tree bindings is
technically feasible (and we are able to do this by only touching
grant-dma-ops.c), although deferred probe timeout still stands (as there is no
IOMMU driver being present actually).
[ 0.583771] virtio-mmio 2000000.virtio: deferred probe timeout, ignoring
dependency
[ 0.615556] virtio_blk virtio0: [vda] 4096000 512-byte logical blocks (2.10
GB/1.95 GiB)
Below the working diff (on top of current series):
diff --git a/drivers/xen/grant-dma-ops.c b/drivers/xen/grant-dma-ops.c
index da9c7ff..6586152 100644
--- a/drivers/xen/grant-dma-ops.c
+++ b/drivers/xen/grant-dma-ops.c
@@ -272,17 +272,24 @@ static const struct dma_map_ops xen_grant_dma_ops = {
bool xen_is_grant_dma_device(struct device *dev)
{
+ struct device_node *iommu_np;
+ bool has_iommu;
+
/* XXX Handle only DT devices for now */
if (!dev->of_node)
return false;
- return of_property_read_bool(dev->of_node, "xen,backend-domid");
+ iommu_np = of_parse_phandle(dev->of_node, "iommus", 0);
+ has_iommu = iommu_np && of_device_is_compatible(iommu_np,
"xen,grant-dma");
+ of_node_put(iommu_np);
+
+ return has_iommu;
}
void xen_grant_setup_dma_ops(struct device *dev)
{
struct xen_grant_dma_data *data;
- uint32_t domid;
+ struct of_phandle_args iommu_spec;
data = find_xen_grant_dma_data(dev);
if (data) {
@@ -294,16 +301,30 @@ void xen_grant_setup_dma_ops(struct device *dev)
if (!dev->of_node)
goto err;
- if (of_property_read_u32(dev->of_node, "xen,backend-domid", &domid)) {
- dev_err(dev, "xen,backend-domid property is not present\n");
+ if (of_parse_phandle_with_args(dev->of_node, "iommus", "#iommu-cells",
+ 0, &iommu_spec)) {
+ dev_err(dev, "Cannot parse iommus property\n");
+ goto err;
+ }
+
+ if (!of_device_is_compatible(iommu_spec.np, "xen,grant-dma") ||
+ iommu_spec.args_count != 1) {
+ dev_err(dev, "Incompatible IOMMU node\n");
+ of_node_put(iommu_spec.np);
goto err;
}
+ of_node_put(iommu_spec.np);
+
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
goto err;
- data->backend_domid = domid;
+ /*
+ * The endpoint ID here means the ID of the domain where the
corresponding
+ * backend is running
+ */
+ data->backend_domid = iommu_spec.args[0];
if (xa_err(xa_store(&xen_grant_dma_devices, (unsigned long)dev, data,
GFP_KERNEL))) {
(END)
Below, the nodes generated by Xen toolstack:
xen_grant_dma {
Nit: iommu {
compatible = "xen,grant-dma";
#iommu-cells = <0x01>;
phandle = <0xfde9>;
};
virtio@2000000 {
compatible = "virtio,mmio";
reg = <0x00 0x2000000 0x00 0x200>;
interrupts = <0x00 0x01 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
Not bad! I like it.
I am wondering, would be the proper solution to eliminate deferred probe
timeout issue in our particular case (without introducing an extra IOMMU
driver)?
In reality I don't think there is a way to do that. I would create an
empty skelethon IOMMU driver for xen,grant-dma.
Does it have to be an empty driver? Originally, IOMMU 'drivers' were not
drivers, but they've been getting converted. Can that be done here?
Short of that, I think we could have some sort of skip probe list for
deferred probe. Not sure if that would be easiest as IOMMU specific or
global.
Hi Oleksandr,
If you do fw_devlink.strict=1, you'll notice that the consumers of
this "iommu" won't probe at all or will delay the boot by some number
of seconds. The eventual goal is to go towards fw_devlink.strict=1
being the default.
ok, I got it.
Let's me please explain our particular case in details, sorry I may
repeat some information which I have already mentioned elsewhere, but it
maybe better to keep the whole context here.
We have Xen grant DMA-mapping layer added by previous commit [1]. For it
to operate properly we need a way to communicate some per-device
information using device-tree,
and this information is Xen specific. This is what the current commit is
doing by introducing new binding to describe that. The next commit [2]
will use that new binding to retrieve required information. There was a
suggestion to consider reusing generic device-tree IOMMU bindings to
communicate this specific information instead of introducing a custom
property.
Although it requires more effort for the Xen toolstack (instead of
adding a code to insert a single "xen,backend-domid" property, we need
to generate fake IOMMU node, reserve phandle for it, etc), from the
device tree PoV it looks indeed good (we reuse endpoint ID to pass the
ID of the domain where the corresponding backend is running), and
resulting code to retrieve this information in our DMA-mapping layer
also looks simple enough [3].
Using generic device-tree IOMMU bindings:
iommu {
compatible = "xen,grant-dma";
#iommu-cells = <0x01>;
phandle = <0xfde9>;
};
virtio@2000000 {
compatible = "virtio,mmio";
reg = <0x00 0x2000000 0x00 0x200>;
interrupts = <0x00 0x01 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
Using Xen specific property:
virtio@2000000 {
compatible = "virtio,mmio";
reg = <0x00 0x2000000 0x00 0x200>;
interrupts = <0x00 0x01 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
xen,backend-domid = <0x01>;
};
The main problem is that idea doesn't quite fit into how Linux currently
behaves for the "iommus" property. Of course, just reusing IOMMU
bindings (without having a corresponding driver) leads to the deferred
probe timeout issue afterwards, because the IOMMU device never becomes
available. From my understanding, our DMA-mapping layer we are consider
to reuse IOMMU bindings for, *cannot* be converted into the proper IOMMU
driver.
Sure, we will need to find a way how to deal with it, if we really want
to reuse the IOMMU bindings. And yes, one idea was to just implement
stub IOMMU driver for that purpose, I have rechecked, it works fine with
that stub driver [4].
From a fw_devlik perspective, please implement a driver. Ideally a
real one, but at least an empty one. The empty one doesn't need to be
an IOMMU driver, but at least just do a return 0 in the probe
function.
If I got things right, I am afraid, for the "of_iommu" case the empty
driver is not enough. The driver should at least register iommu_ops, but
the "of_xlate" callback should be *not* implemented.
In that case, we will get NO_IOMMU (>0 : there is no IOMMU, or one was
unavailable for non-fatal reasons) which is also a success condition, so
-EPROBE_DEFER won't be returned.
https://elixir.bootlin.com/linux/v5.18/source/drivers/iommu/of_iommu.c#L32
Otherwise, of_iommu_xlate() will call driver_deferred_probe_check_state().
https://elixir.bootlin.com/linux/v5.18/source/drivers/iommu/of_iommu.c#L43
Also, if it's not a device, why even have a "compatible"
property (removing it won't necessarily remove the deferred probe
timeout issue you see)? Will any code be using "xen,grant-dma" to look
up the node?
Yes
If so, that driver could be the one that probes this
device. At least from a fw_devlink perspective, it just needs to have
a driver that binds to this device.
Agree
Also, if we aren't going to implement a driver and have the supplier
("xen,grant-dma") behave like a device (as in, have a driver that
probes), I'd rather that the iommu binding not be used at all as this
would be an exception to how every other iommu device behaves.
Agree
Saravana, thank you for the explanation.
To summarize, as I understand, we have three options (the first two are
clear enough, the third is unclear yet):
1. Do not try to reuse IOMMU bindings for current xen-virtio enabling
work, use "xen,backend-domid" property.
2. Reuse IOMMU bindings, for that purpose introduce stub IOMMU driver.
It is a standalone entity in my example, but it can be a part of
grant-dma-ops.c which
actually uses "xen,grant-dma" compatible to look up a node.
3. Try to find other options how to reuse IOMMU bindings but *without*
introducing stub IOMMU driver, such as skip list for deferred probe, etc.
What do the maintainers think regarding the option to go forward?
[1]
https://lore.kernel.org/xen-devel/1651947548-4055-4-git-send-email-olekstysh@xxxxxxxxx/
[2]
https://lore.kernel.org/xen-devel/1651947548-4055-7-git-send-email-olekstysh@xxxxxxxxx/
[3]
https://lore.kernel.org/xen-devel/390ba7bb-ee9e-b7b7-5f08-71a7245fa4ec@xxxxxxxxx/
[4]
https://lore.kernel.org/xen-devel/606dfdcc-ec10-0c4a-04e9-72cd73ee6676@xxxxxxxxx/
-Saravana
--
Regards,
Oleksandr Tyshchenko
