Zynqmp RTC controller has a calibration feature to compensate
time deviation due to input clock inaccuracy.
Set and get calibration API's are used for setting and getting
calibration value from the controller calibration register.
As per RTC spec default calibration value is 0x7FFF.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
---
Changes in V4:
-Updated MIN and MAX calibration values.
-Updated RTC default calibration value to 0x7FFF.
Changes in V3:
-Calculated tick_mult using crystal frequency.
-Calibration register updating based on crystal frequency in probe.
-Supressed MIN an MAX calibration values,Will send separate patch in future.
Changes in V2:
-Removed unused macro.
-Updated code with review comments.
---
drivers/rtc/rtc-zynqmp.c | 115 ++++++++++++++++++++++++++++++++-------
1 file changed, 95 insertions(+), 20 deletions(-)
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index f440bb52be92..ea9feca0299a 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -6,6 +6,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -36,17 +37,23 @@
#define RTC_OSC_EN BIT(24)
#define RTC_BATT_EN BIT(31)
-#define RTC_CALIB_DEF 0x198233
+#define RTC_CALIB_DEF 0x7FFF
#define RTC_CALIB_MASK 0x1FFFFF
#define RTC_ALRM_MASK BIT(1)
#define RTC_MSEC 1000
+#define RTC_FR_MASK 0xF0000
+#define RTC_FR_MAX_TICKS 16
+#define RTC_PPB 1000000000LL
+#define RTC_MIN_OFFSET -32768000
+#define RTC_MAX_OFFSET 32767000
struct xlnx_rtc_dev {
struct rtc_device *rtc;
void __iomem *reg_base;
int alarm_irq;
int sec_irq;
- unsigned int calibval;
+ struct clk *rtc_clk;
+ unsigned int freq;
};
static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
@@ -61,13 +68,6 @@ static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
*/
new_time = rtc_tm_to_time64(tm) + 1;
- /*
- * Writing into calibration register will clear the Tick Counter and
- * force the next second to be signaled exactly in 1 second period
- */
- xrtcdev->calibval &= RTC_CALIB_MASK;
- writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
-
writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
/*
@@ -173,15 +173,76 @@ static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
rtc_ctrl |= RTC_BATT_EN;
writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
+}
- /*
- * Based on crystal freq of 33.330 KHz
- * set the seconds counter and enable, set fractions counter
- * to default value suggested as per design spec
- * to correct RTC delay in frequency over period of time.
+static int xlnx_rtc_read_offset(struct device *dev, long *offset)
+{
+ struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+ unsigned long long rtc_ppb = RTC_PPB;
+ unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq);
+ unsigned int calibval;
+ long offset_val;
+
+ calibval = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+ /* Offset with seconds ticks */
+ offset_val = calibval & RTC_TICK_MASK;
+ offset_val = offset_val - RTC_CALIB_DEF;
+ offset_val = offset_val * tick_mult;
+
+ /* Offset with fractional ticks */
+ if (calibval & RTC_FR_EN)
+ offset_val += ((calibval & RTC_FR_MASK) >> RTC_FR_DATSHIFT)
+ * (tick_mult / RTC_FR_MAX_TICKS);
+ *offset = offset_val;
+
+ return 0;
+}
+
+static int xlnx_rtc_set_offset(struct device *dev, long offset)
+{
+ struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+ unsigned long long rtc_ppb = RTC_PPB;
+ unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq);
+ unsigned char fract_tick;
+ unsigned int calibval;
+ short int max_tick;
+ int fract_offset;
+
+ if (offset < RTC_MIN_OFFSET || offset > RTC_MAX_OFFSET)
+ return -ERANGE;
+
+ /* Number ticks for given offset */
+ max_tick = div_s64_rem(offset, tick_mult, &fract_offset);
+
+ /* Number fractional ticks for given offset */
+ if (fract_offset) {
+ if (fract_offset < 0) {
+ fract_offset = fract_offset + tick_mult;
+ max_tick--;
+ }
+ if (fract_offset > (tick_mult / RTC_FR_MAX_TICKS)) {
+ for (fract_tick = 1; fract_tick < 16; fract_tick++) {
+ if (fract_offset <=
+ (fract_tick *
+ (tick_mult / RTC_FR_MAX_TICKS)))
+ break;
+ }
+ }
+ }
+
+ /* Zynqmp RTC uses second and fractional tick
+ * counters for compensation
*/
- xrtcdev->calibval &= RTC_CALIB_MASK;
- writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+ calibval = max_tick + RTC_CALIB_DEF;
+
+ if (fract_tick)
+ calibval |= RTC_FR_EN;
+
+ calibval |= (fract_tick << RTC_FR_DATSHIFT);
+
+ writel(calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+
+ return 0;
}
static const struct rtc_class_ops xlnx_rtc_ops = {
@@ -190,6 +251,8 @@ static const struct rtc_class_ops xlnx_rtc_ops = {
.read_alarm = xlnx_rtc_read_alarm,
.set_alarm = xlnx_rtc_set_alarm,
.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
+ .read_offset = xlnx_rtc_read_offset,
+ .set_offset = xlnx_rtc_set_offset,
};
static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
@@ -255,10 +318,22 @@ static int xlnx_rtc_probe(struct platform_device *pdev)
return ret;
}
- ret = of_property_read_u32(pdev->dev.of_node, "calibration",
- &xrtcdev->calibval);
- if (ret)
- xrtcdev->calibval = RTC_CALIB_DEF;
+ /* Getting the rtc_clk info */
+ xrtcdev->rtc_clk = devm_clk_get_optional(&pdev->dev, "rtc_clk");
+ if (IS_ERR(xrtcdev->rtc_clk)) {
+ if (PTR_ERR(xrtcdev->rtc_clk) != -EPROBE_DEFER)
+ dev_warn(&pdev->dev, "Device clock not found.\n");
+ }
+ xrtcdev->freq = clk_get_rate(xrtcdev->rtc_clk);
+ if (!xrtcdev->freq) {
+ ret = of_property_read_u32(pdev->dev.of_node, "calibration",
+ &xrtcdev->freq);
+ if (ret)
+ xrtcdev->freq = RTC_CALIB_DEF;
+ }
+ ret = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+ if (!ret)
+ writel(xrtcdev->freq, (xrtcdev->reg_base + RTC_CALIB_WR));
xlnx_init_rtc(xrtcdev);
--
2.17.1
