On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote: > From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > > DPINTF is similar to DPI but does not have the exact same feature set > or register layouts. > > DPINTF is the sink of the display pipeline that is connected to the > DisplayPort controller and encoder unit. It takes the same clocks as > DPI. > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> > --- > .../bindings/display/mediatek/mediatek,dpi.yaml | 13 ++++++++--- > -- > 1 file changed, 8 insertions(+), 5 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam > l > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam > l > index dd2896a40ff0..6d9f6c11806e 100644 > --- > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam > l > +++ > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam > l > @@ -4,16 +4,16 @@ > $id: > http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > -title: mediatek DPI Controller Device Tree Bindings > +title: mediatek DPI/DPINTF Controller > > maintainers: > - CK Hu <ck.hu@xxxxxxxxxxxx> > - Jitao shi <jitao.shi@xxxxxxxxxxxx> > > description: | > - The Mediatek DPI function block is a sink of the display subsystem > and > - provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a > parallel > - output bus. > + The Mediatek DPI and DPINTF function blocks are a sink of the > display > + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 > pixel data on a > + parallel output bus. > > properties: > compatible: > @@ -23,6 +23,7 @@ properties: > - mediatek,mt8173-dpi > - mediatek,mt8183-dpi > - mediatek,mt8192-dpi > + - mediatek,mt8195-dpintf > > reg: > maxItems: 1 > @@ -35,12 +36,14 @@ properties: > - description: Pixel Clock > - description: Engine Clock > - description: DPI PLL > + - description: Optional CK CG Clock > > clock-names: > items: > - const: pixel > - const: engine > - const: pll > + - const: ck_cg 'ck_cg' seems not a exact clock names, could you pleas check it again with DE. > > pinctrl-0: true > pinctrl-1: true > @@ -54,7 +57,7 @@ properties: > $ref: /schemas/graph.yaml#/properties/port > description: > Output port node. This port should be connected to the input > port of an > - attached HDMI or LVDS encoder chip. > + attached HDMI, LVDS or DisplayPort encoder chip. > > required: > - compatible
