Re: [PATCH v1 1/2] Revert "drm/bridge: anx7625: Use DPI bus type"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These two patches need to be reverted since they were part (3/4 & 4/4)
of a series, that was partially (1/4 + 2/4) on the linux-media tree.
These two patches depend on the patches in the media tree, and will
not build without them, which leaves linux-drm-misc-next in a broken
state. Let's revert the two latter patches until rc1 has been branched
and the dependency wont cause issues any more.

On Mon, 23 May 2022 at 14:50, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
>
> On Mon, 23 May 2022 at 10:46, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> >
> > This reverts commit a77c2af0994e24ee36c7ffb6dc852770bdf06fb1.
> > ---
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 01f46d9189c1..53a5da6c49dd 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -1623,14 +1623,14 @@ static int anx7625_parse_dt(struct device *dev,
> >
> >         anx7625_get_swing_setting(dev, pdata);
> >
> > -       pdata->is_dpi = 0; /* default dsi mode */
> > +       pdata->is_dpi = 1; /* default dpi mode */
> >         pdata->mipi_host_node = of_graph_get_remote_node(np, 0, 0);
> >         if (!pdata->mipi_host_node) {
> >                 DRM_DEV_ERROR(dev, "fail to get internal panel.\n");
> >                 return -ENODEV;
> >         }
> >
> > -       bus_type = 0;
> > +       bus_type = V4L2_FWNODE_BUS_TYPE_PARALLEL;
> >         mipi_lanes = MAX_LANES_SUPPORT;
> >         ep0 = of_graph_get_endpoint_by_regs(np, 0, 0);
> >         if (ep0) {
> > @@ -1640,8 +1640,8 @@ static int anx7625_parse_dt(struct device *dev,
> >                 mipi_lanes = of_property_count_u32_elems(ep0, "data-lanes");
> >         }
> >
> > -       if (bus_type == V4L2_FWNODE_BUS_TYPE_DPI) /* bus type is DPI */
> > -               pdata->is_dpi = 1;
> > +       if (bus_type == V4L2_FWNODE_BUS_TYPE_PARALLEL) /* bus type is Parallel(DSI) */
> > +               pdata->is_dpi = 0;
> >
> >         pdata->mipi_lanes = mipi_lanes;
> >         if (pdata->mipi_lanes > MAX_LANES_SUPPORT || pdata->mipi_lanes <= 0)
> > --
> > 2.34.1
> >
>
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux