Re: [PATCH v5 00/10] PolarFire SoC dt for 5.19

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/05/2022 15:26, Conor Dooley wrote:
> Hey all,
> Got a few PolarFire SoC device tree related changes here for 5.19.

Hey Palmer,
I know you're busy etc but I had been hoping you'd take this for
5.19. I know it's late, so nw if it's too late.
Thanks,
Conor.

> 
> Firstly, patches 1 & 2 of this series supersede [0] & are unchanged
> compared to that submission, figured it would just be easier to keep
> all the changes in one series.
> 
> As discussed on irc, patch 3 removes the duplicated "microchip" from
> the device tree files so that they follow a soc-board.dts & a
> soc{,-fabric}.dtsi format.
> 
> Patch 5 makes the fabric dtsi board specific by renaming the file to
> mpfs-icicle-kit-fabric.dtsi & including it in the dts rather than
> mpfs.dtsi. Additionally this will allow other boards to define their
> own reference fabric design. A revision specific compatible, added in
> patch 4, is added to the dt also.
> 
> The remainder of the series adds a bare minimum devicetree for the
> Sundance Polarberry.
> 
> Thanks,
> Conor.
> 
> Changes since v4:
> - Whitespace and status ordering changes in the polarberry dt pointed
>    out by Heiko
> - A new patch for same whitspace and status order changes, but applied
>    to the icicle dt
> - A reordering of the icicle dt alphabetically to match the formatting
>    of the polarberry dt
> 
> Changes since v3:
> - remove an extra line of wshitespace added to dt-binding
> - remove unneeded "okay" status & sort status to node end
> - sort polarberry dts entries in ~alphabetical order
> - add a comment explaining why the second mac (mac0) is disabled on
>    polarberry
> 
> Changes since v2:
> - make ,icicle-reference compatible with ,mpfs & put it inside the enum
> 
> Changes since v1:
> - fixed whitespace problems in the polarberry dts
> - disabled mac0 for the polarberry as its port is on the optional
>    carrier board
> 
> Conor Dooley (10):
>    riscv: dts: microchip: remove icicle memory clocks
>    riscv: dts: microchip: move sysctrlr out of soc bus
>    riscv: dts: microchip: remove soc vendor from filenames
>    dt-bindings: riscv: microchip: document icicle reference design
>    riscv: dts: microchip: make the fabric dtsi board specific
>    dt-bindings: vendor-prefixes: add Sundance DSP
>    dt-bindings: riscv: microchip: add polarberry compatible string
>    riscv: dts: microchip: add the sundance polarberry
>    riscv: microchip: icicle: readability fixes
>    riscv: dts: icicle: sort nodes alphabetically
> 
>   .../devicetree/bindings/riscv/microchip.yaml  |   2 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   arch/riscv/boot/dts/microchip/Makefile        |   3 +-
>   ...abric.dtsi => mpfs-icicle-kit-fabric.dtsi} |   2 +
>   ...pfs-icicle-kit.dts => mpfs-icicle-kit.dts} | 105 +++++++++---------
>   .../dts/microchip/mpfs-polarberry-fabric.dtsi |  16 +++
>   .../boot/dts/microchip/mpfs-polarberry.dts    |  99 +++++++++++++++++
>   .../{microchip-mpfs.dtsi => mpfs.dtsi}        |  11 +-
>   8 files changed, 181 insertions(+), 59 deletions(-)
>   rename arch/riscv/boot/dts/microchip/{microchip-mpfs-fabric.dtsi => mpfs-icicle-kit-fabric.dtsi} (91%)
>   rename arch/riscv/boot/dts/microchip/{microchip-mpfs-icicle-kit.dts => mpfs-icicle-kit.dts} (95%)
>   create mode 100644 arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
>   create mode 100644 arch/riscv/boot/dts/microchip/mpfs-polarberry.dts
>   rename arch/riscv/boot/dts/microchip/{microchip-mpfs.dtsi => mpfs.dtsi} (98%)
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux