Dear,
Please ignore my last replay!
> -----Original Message-----
> From: LI Qingwu
> Sent: Sunday, May 22, 2022 9:23 PM
> To: Jonathan Cameron <jic23@xxxxxxxxxx>
> Cc: lars@xxxxxxxxxx; robh+dt@xxxxxxxxxx; tomas.melin@xxxxxxxxxxx;
> andy.shevchenko@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH V7 5/5] iio: accel: sca3300: Add inclination channels
>
>
>
> > -----Original Message-----
> > From: Jonathan Cameron <jic23@xxxxxxxxxx>
> > Sent: Sunday, May 22, 2022 7:18 PM
> > To: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
> > Cc: lars@xxxxxxxxxx; robh+dt@xxxxxxxxxx; tomas.melin@xxxxxxxxxxx;
> > andy.shevchenko@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH V7 5/5] iio: accel: sca3300: Add inclination
> > channels
> >
> > This email is not from Hexagon’s Office 365 instance. Please be
> > careful while clicking links, opening attachments, or replying to this email.
> >
> >
> > On Sun, 22 May 2022 07:04:19 +0000
> > LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > > Different from SCA3300, SCL3300 can output inclination angles.
> > > Angles are formed from acceleration with following equations:
> > > ANG_X = atan2(accx , sqrt(pow(accy , 2) + pow(accz , 2))) ANG_Y =
> > > atan2(accy , sqrt(pow(accx , 2) + pow(accz , 2))) ANG_Z = atan2(accz
> > > , sqrt(pow(accx , 2) + pow(accy , 2)))
> > >
> > > The commit adds the output of the raw value, scale and
> > > scale_available of angles.
> > >
> > > New interfaces:
> > > in_incli_scale
> > > in_incli_scale_available
> > > in_incli_x_raw
> > > in_incli_y_raw
> > > in_incli_z_raw
> > > Data converted by application of scale to degrees.
> > >
> > > Signed-off-by: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
> >
> > Hi Li,
> >
> > A few small things to tidy up in this patch. See inline.
> >
> >
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > drivers/iio/accel/sca3300.c | 76
> > > +++++++++++++++++++++++++++++++++++--
> > > 1 file changed, 73 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/iio/accel/sca3300.c
> > > b/drivers/iio/accel/sca3300.c index 10bedb14d4f0..9094f16458de
> > > 100644
> > > --- a/drivers/iio/accel/sca3300.c
> > > +++ b/drivers/iio/accel/sca3300.c
> > > @@ -44,12 +44,18 @@
> > > #define SCA3300_VALUE_RS_ERROR 0x3
> > > #define SCA3300_MASK_RS_STATUS GENMASK(1, 0)
> > >
> > > +#define SCL3300_REG_ANG_CTRL 0x0C
> > > +#define SCL3300_ANG_ENABLE 0x1F
> > > +
> > > enum sca3300_scan_indexes {
> > > SCA3300_ACC_X = 0,
> > > SCA3300_ACC_Y,
> > > SCA3300_ACC_Z,
> > > SCA3300_TEMP,
> > > SCA3300_TIMESTAMP,
> > > + SCA3300_INCLI_X,
> > > + SCA3300_INCLI_Y,
> > > + SCA3300_INCLI_Z,
> > > };
> > >
> > > #define SCA3300_ACCEL_CHANNEL(index, reg, axis)
> > { \
> > > @@ -73,6 +79,24 @@ enum sca3300_scan_indexes {
> > > },
> > \
> > > }
> > >
> > > +#define SCA3300_INCLI_CHANNEL(index, reg, axis)
> > { \
> > > + .type = IIO_INCLI,
> > \
> > > + .address = reg,
> > \
> > > + .modified = 1,
> > \
> > > + .channel2 = IIO_MOD_##axis,
> > \
> > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> > \
> > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > \
> > > + .info_mask_shared_by_type_available =
> > \
> > > + BIT(IIO_CHAN_INFO_SCALE),
> > \
> >
> > I don't think you need this line wrap.
>
> Thanks you Jonathan, Then I will delete it and also following incl scale available
> read and incli set related.
>
> >
> > > + .scan_index = index,
> > \
> > > + .scan_type =
> > { \
> > > + .sign = 's',
> > \
> > > + .realbits = 16,
> > \
> > > + .storagebits = 16,
> > \
> > > + .endianness = IIO_CPU,
> > \
> > > + },
> > \
> > > +}
> > > +
> > > #define SCA3300_TEMP_CHANNEL(index, reg)
> > { \
> > > .type = IIO_TEMP,
> > \
> > > .address = reg,
> > \
> > > @@ -106,15 +130,36 @@ static const int sca3300_accel_scale_map[] =
> > > {0, 1, 2, 2}; static const int scl3300_accel_scale[][2] = {{0,
> > > 167}, {0, 333}, {0, 83}}; static const int
> > > scl3300_accel_scale_map[] = {0, 1, 2};
> > >
> > > +static const int scl3300_incli_scale[][2] = {{0, 5495}}; static
> > > +const int scl3300_incli_scale_map[] = {0, 0, 0};
> > > +
> > > static const int sca3300_avail_modes_map[] = {0, 1, 2, 3}; static
> > > const int scl3300_avail_modes_map[] = {0, 1, 3};
> > >
> > > +static const struct iio_chan_spec scl3300_channels[] = {
> > > + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_X, 0x1, X),
> > > + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Y, 0x2, Y),
> > > + SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Z, 0x3, Z),
> > > + SCA3300_TEMP_CHANNEL(SCA3300_TEMP, 0x05),
> > > + IIO_CHAN_SOFT_TIMESTAMP(4),
> > > + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_X, 0x09, X),
> > > + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Y, 0x0A, Y),
> > > + SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Z, 0x0B, Z), };
> > > +
> > > static const unsigned long sca3300_scan_masks[] = {
> > > BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z)
> |
> > > BIT(SCA3300_TEMP),
> > > 0
> > > };
> > >
> > > +static const unsigned long scl3300_scan_masks[] = {
> > > + BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z)
> |
> > > + BIT(SCA3300_TEMP) |
> > > + BIT(SCA3300_INCLI_X) | BIT(SCA3300_INCLI_Y) |
> > BIT(SCA3300_INCLI_Z),
> > > + 0
> > > +};
> > > +
> > > struct sca3300_chip_info {
> > > const char *name;
> > > const unsigned long *scan_masks; @@ -123,6 +168,9 @@ struct
> > > sca3300_chip_info {
> > > u8 num_accel_scales;
> > > const int (*accel_scale)[2];
> > > const int *accel_scale_map;
> > > + const int (*incli_scale)[2];
> > > + const int *incli_scale_map;
> > > + u8 num_incli_scales;
> > > u8 num_freqs;
> > > const int *freq_table;
> > > const int *freq_map;
> > > @@ -131,6 +179,7 @@ struct sca3300_chip_info {
> > > u8 chip_id;
> > > };
> > >
> > > +
> > Unrelated and unwanted white space chagne.
> >
> > > /**
> > > * struct sca3300_data - device data
> > > * @spi: SPI device structure
> > > @@ -168,12 +217,16 @@ static const struct sca3300_chip_info
> > sca3300_chip_tbl[] = {
> > > .num_avail_modes = 4,
> > > .chip_id = SCA3300_WHOAMI_ID,
> > > },
> > > - { .scan_masks = sca3300_scan_masks,
> > > - .channels = sca3300_channels,
> > > - .num_channels = ARRAY_SIZE(sca3300_channels),
> > > + {
> >
> > ah. The whitespace change belongs in patch 4.
> >
> > > + .scan_masks = scl3300_scan_masks,
> > > + .channels = scl3300_channels,
> > > + .num_channels = ARRAY_SIZE(scl3300_channels),
> > > .num_accel_scales = ARRAY_SIZE(scl3300_accel_scale)*2,
> > > .accel_scale = scl3300_accel_scale,
> > > .accel_scale_map = scl3300_accel_scale_map,
> > > + .incli_scale = scl3300_incli_scale,
> > > + .incli_scale_map = scl3300_incli_scale_map,
> > > + .num_incli_scales =
> > > + ARRAY_SIZE(scl3300_incli_scale)*2,
> > > .num_freqs = ARRAY_SIZE(scl3300_lp_freq),
> > > .freq_table = scl3300_lp_freq,
> > > .freq_map = scl3300_lp_freq_map, @@ -400,6 +453,11
> > @@
> > > static int sca3300_read_raw(struct iio_dev *indio_dev,
> > > if (ret)
> > > return ret;
> > > switch (chan->type) {
> > > + case IIO_INCLI:
> > > + index = data->chip->incli_scale_map[index];
> I will delete incli_scale_map as well, change to:
> *val = data->chip->incli_scale[0];
> *val2 = data->chip->incli_scale[1];
>
> > > + *val = data->chip->incli_scale[index][0];
> > > + *val2 = data->chip->incli_scale[index][1];
> > > + return IIO_VAL_INT_PLUS_MICRO;
> > > case IIO_ACCEL:
> > > index = data->chip->accel_scale_map[index];
> > > *val = data->chip->accel_scale[index][0];
> > > @@ -486,6 +544,13 @@ static int sca3300_init(struct sca3300_data
> > > *sca_data,
> > >
> > > sca_data->chip = &sca3300_chip_tbl[i];
> > >
> > > + if (value == SCL3300_WHOAMI_ID) {
> >
> > I don't like feature decisions being based directly on a WHOAMI.
> > That tends not to scale as you add more supported parts to the driver.
> >
> > I think this is the only case you now have.
> >
> > Better would be to add a 'inclination_supported' bool to your chip
> > info and make the decision based on that. I wouldn't use whether
> > incli_scale is set as that would hurt readability when compared to a
> > new member serving just this purpose.
>
> Thanks Jonathan!
> Then I will back to " bool angle" in sca3300_chip_info, do you agree? 😊
>
> >
> >
> > > + ret = sca3300_write_reg(sca_data,
> > SCL3300_REG_ANG_CTRL,
> > > + SCL3300_ANG_ENABLE);
> > > + if (ret)
> > > + return ret;
> > > + }
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -521,6 +586,11 @@ static int sca3300_read_avail(struct iio_dev
> > *indio_dev,
> > > switch (mask) {
> > > case IIO_CHAN_INFO_SCALE:
> > > switch (chan->type) {
> > > + case IIO_INCLI:
> > > + *vals = (const int *)data->chip->incli_scale;
> > > + *length = data->chip->num_incli_scales;
> > > + *type = IIO_VAL_INT_PLUS_MICRO;
> > > + return IIO_AVAIL_LIST;
> I will delete case IIO_INCLI
> > > case IIO_ACCEL:
> > > *vals = (const int *)data->chip->accel_scale;
> > > *length = data->chip->num_accel_scales;
