[RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a node for the camera-specific i2c bus found on msm8974.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 62 +++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ffa6f874917a..a80b4ae71745 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1434,6 +1434,34 @@ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
 
 			/* BLSP2_I2C6 info is missing - nobody uses it though? */
 
+			cci0_default: cci0-default {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci0_sleep: cci0-sleep {
+				pins = "gpio19", "gpio20";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci1_default: cci1-default {
+				pins = "gpio21", "gpio22";
+				function = "cci_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci1_sleep: cci1-sleep {
+				pins = "gpio21", "gpio22";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			spi8_default: spi8_default {
 				mosi {
 					pins = "gpio45";
@@ -1587,6 +1615,40 @@ dsi0_phy: dsi-phy@fd922a00 {
 			};
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: adreno@fdb00000 {
 			compatible = "qcom,adreno-330.1", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
-- 
2.36.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux