ICC path for the GPU incorrectly states <&gnoc 1 &bimc 5>, which is
a path from SLAVE_GNOC_BIMC to SLAVE_EBI. According to the downstream
kernel sources, the GPU uses MASTER_OXILI here, which is equivalent to
<&bimc 1 ...>.
While we are at it, use defined names instead of the numbers for this
interconnect path.
Fixes: 5cf69dcbec8b ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reported-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 11ec8b3cfe38..1c887b9055b3 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1045,7 +1046,7 @@ adreno_gpu: gpu@5000000 {
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
- interconnects = <&gnoc 1 &bimc 5>;
+ interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
interconnect-names = "gfx-mem";
operating-points-v2 = <&gpu_sdm630_opp_table>;
--
2.35.1
