In preparation to adding second USB host/PHY pair, change first USB
PHY's label to qusb2phy0.
Suggested-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 42af1fade461..00baacf28c63 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -224,7 +224,7 @@ &pon_resin {
linux,code = <KEY_VOLUMEUP>;
};
-&qusb2phy {
+&qusb2phy0 {
status = "okay";
vdd-supply = <&vreg_l1b_0p925>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 0ffd8e382d8c..f4d09784ff29 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1254,13 +1254,13 @@ usb3_dwc3: usb@a800000 {
* haven't seen any devices making use of it.
*/
maximum-speed = "high-speed";
- phys = <&qusb2phy>;
+ phys = <&qusb2phy0>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
- qusb2phy: phy@c012000 {
+ qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
#phy-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index dcbaacf18f66..9280c1f0c334 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -103,7 +103,7 @@ &pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
};
-&qusb2phy {
+&qusb2phy0 {
status = "okay";
vdd-supply = <&vreg_l1b_0p925>;
--
2.35.1
