Add support for mt7986-eth driver available on mt7986 soc.
Changes since v2:
- rely on GFP_KERNEL whenever possible
- define mtk_reg_map struct to introduce soc register map and avoid macros
- improve comments
Changes since v1:
- drop SRAM option
- convert ring->dma to void
- convert scratch_ring to void
- enable port4
- fix irq dts bindings
- drop gmac1 support from mt7986a-rfb dts for the moment
Lorenzo Bianconi (16):
arm64: dts: mediatek: mt7986: introduce ethernet nodes
dt-bindings: net: mediatek,net: add mt7986-eth binding
net: ethernet: mtk_eth_soc: rely on GFP_KERNEL for dma_alloc_coherent
whenever possible
net: ethernet: mtk_eth_soc: move tx dma desc configuration in
mtk_tx_set_dma_desc
net: ethernet: mtk_eth_soc: add txd_size to mtk_soc_data
net: ethernet: mtk_eth_soc: rely on txd_size in
mtk_tx_alloc/mtk_tx_clean
net: ethernet: mtk_eth_soc: rely on txd_size in mtk_desc_to_tx_buf
net: ethernet: mtk_eth_soc: rely on txd_size in txd_to_idx
net: ethernet: mtk_eth_soc: add rxd_size to mtk_soc_data
net: ethernet: mtk_eth_soc: rely on txd_size field in
mtk_poll_tx/mtk_poll_rx
net: ethernet: mtk_eth_soc: rely on rxd_size field in
mtk_rx_alloc/mtk_rx_clean
net: ethernet: mtk_eth_soc: introduce device register map
net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support
net: ethernet: mtk_eth_soc: convert ring dma pointer to void
net: ethernet: mtk_eth_soc: convert scratch_ring pointer to void
net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset
.../devicetree/bindings/net/mediatek,net.yaml | 141 ++-
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 74 ++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 39 +
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 70 ++
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 834 +++++++++++++-----
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 305 ++++---
6 files changed, 1113 insertions(+), 350 deletions(-)
--
2.35.3
