Hi All, RZ/V2M has a simple pin and GPIO controller combined similar to RZ/G2L. However, the differences are enough that I don't think it makes sense to try to add support for RZ/V2M into the existing RZ/G2L driver. GPIO interrupt support has been omitted from this driver, to be added at a later date. Phil Edworthy (2): dt-bindings: pinctrl: renesas: Add DT bindings for RZ/V2M pinctrl pinctrl: renesas: Add RZ/V2M pin and gpio controller driver .../pinctrl/renesas,rzv2m-pinctrl.yaml | 174 +++ drivers/pinctrl/renesas/Kconfig | 13 + drivers/pinctrl/renesas/Makefile | 1 + drivers/pinctrl/renesas/pinctrl-rzv2m.c | 1149 +++++++++++++++++ include/dt-bindings/pinctrl/rzv2m-pinctrl.h | 23 + 5 files changed, 1360 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml create mode 100644 drivers/pinctrl/renesas/pinctrl-rzv2m.c create mode 100644 include/dt-bindings/pinctrl/rzv2m-pinctrl.h -- 2.34.1