These series patches add support for PCIe PHY driver on MediaTek chipsets.
Changes in v9:
1. Check if the return value is -ENOMEM when reading efuse data fails.
Changes in v8:
1. Use "device_property_present()" to increase human readability;
2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").
Changes in v7:
1. Add bitfield.h header to fix the build error on non-arm64 platforms.
Changes in v6:
1. Remove unnecessary header files;
2. Use FILELD_PREP in bitfield.h to set value.
Changes in v5:
1. Fix typo in kerneldoc: "eFues" => "eFuse".
Changes in v4:
1. Fix no return when calling dev_err_probe.
Changes in v3:
1. Add introductions for structure members;
2. Add SoC dependent data;
3. Dynamically allocate efuse data;
4. Check return value if it's an -EPROBE_DEFER.
Changes in v2:
1. Add specific compatible name;
2. Read NVMEM data at probe time;
3. Fix typos.
Jianjun Wang (2):
dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
phy: mediatek: Add PCIe PHY driver
.../bindings/phy/mediatek,pcie-phy.yaml | 75 +++++
drivers/phy/mediatek/Kconfig | 11 +
drivers/phy/mediatek/Makefile | 1 +
drivers/phy/mediatek/phy-mtk-pcie.c | 267 ++++++++++++++++++
4 files changed, 354 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
--
2.18.0
