On Tue, May 17, 2022 at 10:34:51PM +0200, Luca Weiss wrote:
> BAM DMUX is used as the network interface to the modem.
>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
Thanks for sending this patch!
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-msm8974.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index 814ad0b46232..ffa6f874917a 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -1146,6 +1146,18 @@ spmi_bus: spmi@fc4cf000 {
> #interrupt-cells = <4>;
> };
>
> + bam_dmux_dma: dma-controller@fc834000 {
> + compatible = "qcom,bam-v1.4.0";
> + reg = <0xfc834000 0x7000>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> +
> + num-channels = <6>;
> + qcom,num-ees = <1>;
> + qcom,powered-remotely;
> + };
> +
> remoteproc_mss: remoteproc@fc880000 {
> compatible = "qcom,msm8974-mss-pil";
> reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
> @@ -1180,6 +1192,20 @@ mpss {
> memory-region = <&mpss_region>;
> };
>
> + bam_dmux: bam-dmux {
> + compatible = "qcom,bam-dmux";
> +
> + interrupt-parent = <&modem_smsm>;
> + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "pc", "pc-ack";
> +
> + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
> + qcom,smem-state-names = "pc", "pc-ack";
> +
> + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
> + dma-names = "tx", "rx";
> + };
> +
> smd-edge {
> interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
>
> --
> 2.36.0
>
