Re: [PATCH v1 11/17] ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Max,

On Wed, May 18, 2022 at 11:21 AM Max Krummenacher <max.oss.09@xxxxxxxxx> wrote:

> In my (limited) testing I saw no issues that the camera would not come up.
> It takes 2 to 3 seconds until the pipeline is running but I noted no hickups.
> I did this with setting the resolution to 640x480 and 1920x1080 which
> probably would not relate to the LP-11 issue you mention.
>
> I.e. I set up the v4l2 pipeline and start capture to the screen as follows:

Just curious: which baseboard did you use to test the ov5640 camera?

Most likely there was an issue with the customer's baseboard that
prevented the camera capture to start.

Thanks



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux