Convert the ipi doc to yaml.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
v2:
Fix the warnings reported by Rob
v3:
Run dtbs_check
v4:
fix the formatting
v5:
fix alignment
fix quotes
double space errors
remove consumer example
.../mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 ----------------
.../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 140 ++++++++++++++++++
2 files changed, 140 insertions(+), 127 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
create mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf881..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
- +-------------------------------------+
- | Xilinx ZynqMP IPI Controller |
- +-------------------------------------+
- +--------------------------------------------------+
-ATF | |
- | |
- | |
- +--------------------------+ |
- | |
- | |
- +--------------------------------------------------+
- +------------------------------------------+
- | +----------------+ +----------------+ |
-Hardware | | IPI Agent | | IPI Buffers | |
- | | Registers | | | |
- | | | | | |
- | +----------------+ +----------------+ |
- | |
- | Xilinx IPI Agent Block |
- +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent: Phandle for the interrupt controller
-- interrupts: Interrupt information corresponding to the
- interrupt-names property.
-- xlnx,ipi-id: local Xilinx IPI agent ID
-- #address-cells: number of address cells of internal IPI mailbox nodes
-- #size-cells: number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg: IPI buffers address ranges
-- reg-names: Names of the reg resources. It should have:
- * local_request_region
- - IPI request msg buffer written by local and read
- by remote
- * local_response_region
- - IPI response msg buffer written by local and read
- by remote
- * remote_request_region
- - IPI request msg buffer written by remote and read
- by local
- * remote_response_region
- - IPI response msg buffer written by remote and read
- by local
-- #mbox-cells: Shall be 1. It contains:
- * tx(0) or rx(1) channel
-- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is
- connected to.
-
-Optional properties:
---------------------
-- method: The method of accessing the IPI agent registers.
- Permitted values are: "smc" and "hvc". Default is
- "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes: Standard property to specify a mailbox
- (See ./mailbox.txt)
-- mbox-names: List of identifier strings for each mailbox
- channel.
-
-Example:
-===========================
- zynqmp_ipi {
- compatible = "xlnx,zynqmp-ipi-mailbox";
- interrupt-parent = <&gic>;
- interrupts = <0 29 4>;
- xlnx,ipi-id = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* APU<->RPU0 IPI mailbox controller */
- ipi_mailbox_rpu0: mailbox@ff990400 {
- reg = <0xff990400 0x20>,
- <0xff990420 0x20>,
- <0xff990080 0x20>,
- <0xff9900a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <1>;
- };
- /* APU<->RPU1 IPI mailbox controller */
- ipi_mailbox_rpu1: mailbox@ff990440 {
- reg = <0xff990440 0x20>,
- <0xff990460 0x20>,
- <0xff990280 0x20>,
- <0xff9902a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <2>;
- };
- };
- rpu0 {
- ...
- mboxes = <&ipi_mailbox_rpu0 0>,
- <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
- };
- rpu1 {
- ...
- mboxes = <&ipi_mailbox_rpu1 0>,
- <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
- };
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..2193141dd7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+ The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+ messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+ agent owns registers used for notification and buffers for message.
+
+ +-------------------------------------+
+ | Xilinx ZynqMP IPI Controller |
+ +-------------------------------------+
+ +--------------------------------------------------+
+ TF-A | |
+ | |
+ | |
+ +--------------------------+ |
+ | |
+ | |
+ +--------------------------------------------------+
+ +------------------------------------------+
+ | +----------------+ +----------------+ |
+ Hardware | | IPI Agent | | IPI Buffers | |
+ | | Registers | | | |
+ | | | | | |
+ | +----------------+ +----------------+ |
+ | |
+ | Xilinx IPI Agent Block |
+ +------------------------------------------+
+
+maintainers:
+ - Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-ipi-mailbox
+
+ method:
+ description: |
+ The method of calling the PM-API firmware layer.
+ Permitted values are.
+ - "smc" : SMC #0, following the SMCCC
+ - "hvc" : HVC #0, following the SMCCC
+
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - smc
+ - hvc
+ default: smc
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+ xlnx,ipi-id:
+ description: |
+ Remote Xilinx IPI agent ID of which the mailbox is connected to.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ interrupts:
+ maxItems: 1
+
+ ranges: true
+
+patternProperties:
+ '^mailbox@[0-9a-f]+$':
+ description: Internal ipi mailbox node
+ type: object # DT nodes are json objects
+ properties:
+ xlnx,ipi-id:
+ description:
+ Remote Xilinx IPI agent ID of which the mailbox is connected to.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ '#mbox-cells':
+ const: 1
+ description:
+ It contains tx(0) or rx(1) channel IPI id number.
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: local_request_region
+ - const: local_response_region
+ - const: remote_request_region
+ - const: remote_response_region
+
+ required:
+ - reg
+ - reg-names
+ - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - '#address-cells'
+ - '#size-cells'
+ - xlnx,ipi-id
+
+examples:
+ - |
+ #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+ amba {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ zynqmp-mailbox {
+ compatible = "xlnx,zynqmp-ipi-mailbox";
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ xlnx,ipi-id = <0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mailbox: mailbox@ff9905c0 {
+ reg = <0x0 0xff9905c0 0x0 0x20>,
+ <0x0 0xff9905e0 0x0 0x20>,
+ <0x0 0xff990e80 0x0 0x20>,
+ <0x0 0xff990ea0 0x0 0x20>;
+ reg-names = "local_request_region",
+ "local_response_region",
+ "remote_request_region",
+ "remote_response_region";
+ #mbox-cells = <1>;
+ xlnx,ipi-id = <4>;
+ };
+ };
+ };
+
+...
--
2.17.1
