From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board. Additional details available at https://www.toradex.com/products/carrier-board/iris-carrier-board Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- Changes in v2: - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which slipped into this patch set by error. - Re-based on top of Shawn's for-next. arch/arm/boot/dts/Makefile | 6 + arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | 112 ++++++++++++++++++ arch/arm/boot/dts/imx7-colibri-iris.dtsi | 108 +++++++++++++++++ .../boot/dts/imx7d-colibri-emmc-iris-v2.dts | 21 ++++ arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts | 21 ++++ arch/arm/boot/dts/imx7d-colibri-iris-v2.dts | 83 +++++++++++++ arch/arm/boot/dts/imx7d-colibri-iris.dts | 56 +++++++++ arch/arm/boot/dts/imx7s-colibri-iris-v2.dts | 78 ++++++++++++ arch/arm/boot/dts/imx7s-colibri-iris.dts | 51 ++++++++ 9 files changed, 536 insertions(+) create mode 100644 arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi create mode 100644 arch/arm/boot/dts/imx7-colibri-iris.dtsi create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-iris.dts create mode 100644 arch/arm/boot/dts/imx7s-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7s-colibri-iris.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a496c4751c86..e8c109d5e3bd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -735,8 +735,12 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-aster.dtb \ imx7d-colibri-emmc-aster.dtb \ + imx7d-colibri-emmc-iris.dtb \ + imx7d-colibri-emmc-iris-v2.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-colibri-iris.dtb \ + imx7d-colibri-iris-v2.dtb \ imx7d-flex-concentrator.dtb \ imx7d-flex-concentrator-mfg.dtb \ imx7d-mba7.dtb \ @@ -756,6 +760,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-zii-rpu2.dtb \ imx7s-colibri-aster.dtb \ imx7s-colibri-eval-v3.dtb \ + imx7s-colibri-iris.dtb \ + imx7s-colibri-iris-v2.dtb \ imx7s-mba7.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_IMX7ULP) += \ diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..6e199613583c --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */ + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; +}; + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to + * turn the transceiver off, that property has to be deleted and the gpio handled in + * userspace. + * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on. + */ + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM<A> */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + status = "okay"; +}; + +/* Colibri PWM<D> */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD, UHS-I capable uSD slot */ +&usdhc1 { + cap-power-off-card; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/imx7-colibri-iris.dtsi new file mode 100644 index 000000000000..175c5d478d2e --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-iris.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/* Colibri AD0 to AD3 */ +&adc1 { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ + pinctrl-0 = <&pinctrl_atmel_adapter>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ +}; + +/* Colibri SSP */ +&ecspi3 { + status = "okay"; +}; + +/* Colibri Fast Ethernet */ +&fec1 { + status = "okay"; +}; + +&gpio2 { + /* + * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled in userspace. + * The same applies to uart1_tx_on where the UART1 transceiver is turned on. + */ + uart25-tx-on-hog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +&gpio5 { + uart1-tx-on-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c4 { + status = "okay"; +}; + +/* Colibri PWM<A> */ +&pwm1 { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<D> */ +&pwm4 { + status = "okay"; +}; + +/* M41T0M6 real time clock */ +&rtc { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + status = "okay"; +}; + +/* Colibri UART_B */ +&uart2 { + status = "okay"; +}; + +/* Colibri UART_C */ +&uart3 { + status = "okay"; +}; + +/* Colibri USBC */ +&usbotg1 { + status = "okay"; +}; + +/* Colibri MMC/SD */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts new file mode 100644 index 000000000000..7347659557f3 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris-v2", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts new file mode 100644 index 000000000000..5324c92e368d --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-iris", + "toradex,colibri-imx7d-emmc", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts new file mode 100644 index 000000000000..5762f51d5f0f --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7d-iris-v2", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/imx7d-colibri-iris.dts new file mode 100644 index 000000000000..9c63cb9d9a64 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-iris.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Iris Carrier Board"; + compatible = "toradex,colibri-imx7d-iris", + "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts new file mode 100644 index 000000000000..72b5c17ab1ab --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris V2 Carrier Board"; + compatible = "toradex,colibri-imx7s-iris-v2", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map-hog { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; + +&gpio7 { + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; + + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* This turns the LVDS transceiver on */ + lvds-power-on-hog { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/imx7s-colibri-iris.dts new file mode 100644 index 000000000000..26ba72c17feb --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-iris.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Iris Carrier Board"; + compatible = "toradex,colibri-imx7s-iris", + "toradex,colibri-imx7s", + "fsl,imx7s"; +}; + +&ad7879_ts { + status = "okay"; +}; + +/* + * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. + * So if you enable following capacitive touch controller, disable pwm2/pwm3 first. + */ +&atmel_mxt_ts { + status = "disabled"; +}; + +&backlight { + status = "okay"; +}; + +&lcdif { + status = "okay"; +}; + +&panel_dpi { + status = "okay"; +}; + +/* Colibri PWM<B> */ +&pwm2 { + /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; + +/* Colibri PWM<C> */ +&pwm3 { + /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ + status = "okay"; +}; -- 2.35.1
