From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Add Colibri SSP aka SPI chip select (CS) aka slave select (SS) pins as
either used on Arduino UNO compatible header X18 or Raspberry Pi
compatible header X20.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
(no changes since v1)
arch/arm/boot/dts/imx7-colibri-aster.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index a89c868ff3ed..117965705814 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -7,6 +7,16 @@ &adc1 {
status = "okay";
};
+/* Colibri SSP */
+&ecspi3 {
+ cs-gpios = <
+ &gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or */
+ &gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+ &gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+ >;
+ status = "okay";
+};
+
&fec1 {
status = "okay";
};
--
2.35.1
