From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.
Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
Reviewed-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Tested-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Cc: Mike Turquette <mturquette@xxxxxxxxxx>
---
.../devicetree/bindings/clock/exynos7-clock.txt | 67 ++++
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos7.c | 425 +++++++++++++++++++++
include/dt-bindings/clock/exynos7-clk.h | 49 +++
4 files changed, 542 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
create mode 100644 drivers/clk/samsung/clk-exynos7.c
create mode 100644 include/dt-bindings/clock/exynos7-clk.h
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 0000000..789f761
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,67 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+ compatible strings to indicate the clock controller
+ functionality.
+
+ - "samsung,exynos7-clock-topc"
+ - "samsung,exynos7-clock-top0"
+ - "samsung,exynos7-clock-peric0"
+ - "samsung,exynos7-clock-peric1"
+ - "samsung,exynos7-clock-peris"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to
+ find the input clocks for a given controller.
+
+- clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top0 clock controller:
+ - fin_pll
+ - dout_sclk_bus0_pll
+ - dout_sclk_bus1_pll
+ - dout_sclk_cc_pll
+ - dout_sclk_mfc_pll
+
+Input clocks for peric0 clock controller:
+ - fin_pll
+ - dout_aclk_peric0_66
+ - sclk_uart0
+
+Input clocks for peric1 clock controller:
+ - fin_pll
+ - dout_aclk_peric1_66
+ - sclk_uart1
+ - sclk_uart2
+ - sclk_uart3
+
+Input clocks for peris clock controller:
+ - fin_pll
+ - dout_aclk_peris_66
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 6fb4bc6..137bf9b 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o
+obj-$(CONFIG_ARCH_EXYNOS7) += clk-exynos7.o
obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
new file mode 100644
index 0000000..57712b0
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/* Register Offset definitions for CMU_TOPC (0x10570000) */
+#define CC_PLL_LOCK 0x0000
+#define BUS0_PLL_LOCK 0x0004
+#define BUS1_DPLL_LOCK 0x0008
+#define MFC_PLL_LOCK 0x000C
+#define AUD_PLL_LOCK 0x0010
+#define CC_PLL_CON0 0x0100
+#define BUS0_PLL_CON0 0x0110
+#define BUS1_DPLL_CON0 0x0120
+#define MFC_PLL_CON0 0x0130
+#define AUD_PLL_CON0 0x0140
+#define MUX_SEL_TOPC0 0x0200
+#define MUX_SEL_TOPC1 0x0204
+#define MUX_SEL_TOPC3 0x020C
+#define DIV_TOPC1 0x0604
+#define DIV_TOPC3 0x060C
+
+static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
+ FFACTOR(0, "ffac_topc_bus0_pll_div4",
+ "ffac_topc_bus0_pll_div2", 1, 2, 0),
+ FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
+ FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
+ FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
+};
+
+/* List of parent clocks for Muxes in CMU_TOPC */
+PNAME(mout_bus0_pll_ctrl_p) = { "fin_pll", "fout_bus0_pll" };
+PNAME(mout_bus1_pll_ctrl_p) = { "fin_pll", "fout_bus1_pll" };
+PNAME(mout_cc_pll_ctrl_p) = { "fin_pll", "fout_cc_pll" };
+PNAME(mout_mfc_pll_ctrl_p) = { "fin_pll", "fout_mfc_pll" };
+
+PNAME(mout_topc_group2) = { "mout_sclk_bus0_pll_cmuc",
+ "mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
+ "mout_sclk_mfc_pll_cmuc" };
+
+PNAME(mout_sclk_bus0_pll_cmuc_p) = { "mout_bus0_pll_ctrl",
+ "ffac_topc_bus0_pll_div2", "ffac_topc_bus0_pll_div4"};
+PNAME(mout_sclk_bus1_pll_cmuc_p) = { "mout_bus1_pll_ctrl",
+ "ffac_topc_bus1_pll_div2"};
+PNAME(mout_sclk_cc_pll_cmuc_p) = { "mout_cc_pll_ctrl",
+ "ffac_topc_cc_pll_div2"};
+PNAME(mout_sclk_mfc_pll_cmuc_p) = { "mout_mfc_pll_ctrl",
+ "ffac_topc_mfc_pll_div2"};
+
+
+PNAME(mout_sclk_bus0_pll_out_p) = {"mout_bus0_pll_ctrl",
+ "ffac_topc_bus0_pll_div2"};
+
+static unsigned long topc_clk_regs[] __initdata = {
+ CC_PLL_LOCK,
+ BUS0_PLL_LOCK,
+ BUS1_DPLL_LOCK,
+ MFC_PLL_LOCK,
+ AUD_PLL_LOCK,
+ CC_PLL_CON0,
+ BUS0_PLL_CON0,
+ BUS1_DPLL_CON0,
+ MFC_PLL_CON0,
+ AUD_PLL_CON0,
+ MUX_SEL_TOPC0,
+ MUX_SEL_TOPC1,
+ MUX_SEL_TOPC3,
+ DIV_TOPC1,
+ DIV_TOPC3,
+};
+
+static struct samsung_mux_clock topc_mux_clks[] __initdata = {
+ MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
+ MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
+ MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
+ MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
+
+ MUX(0, "mout_sclk_bus0_pll_cmuc", mout_sclk_bus0_pll_cmuc_p,
+ MUX_SEL_TOPC0, 16, 2),
+ MUX(0, "mout_sclk_bus1_pll_cmuc", mout_sclk_bus1_pll_cmuc_p,
+ MUX_SEL_TOPC0, 20, 1),
+ MUX(0, "mout_sclk_cc_pll_cmuc", mout_sclk_cc_pll_cmuc_p,
+ MUX_SEL_TOPC0, 24, 1),
+ MUX(0, "mout_sclk_mfc_pll_cmuc", mout_sclk_mfc_pll_cmuc_p,
+ MUX_SEL_TOPC0, 28, 1),
+
+ MUX(0, "mout_sclk_bus0_pll_out", mout_sclk_bus0_pll_out_p,
+ MUX_SEL_TOPC1, 16, 1),
+
+ MUX(0, "mout_aclk_peris_66", mout_topc_group2, MUX_SEL_TOPC3, 24, 2),
+};
+
+static struct samsung_div_clock topc_div_clks[] __initdata = {
+ DIV(DOUT_ACLK_PERIS, "dout_aclk_peris_66", "mout_aclk_peris_66",
+ DIV_TOPC1, 24, 4),
+
+ DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out",
+ DIV_TOPC3, 0, 3),
+ DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl",
+ DIV_TOPC3, 8, 3),
+ DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_cc_pll_ctrl",
+ DIV_TOPC3, 12, 3),
+ DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl",
+ DIV_TOPC3, 16, 3),
+};
+
+static struct samsung_pll_clock topc_pll_clks[] __initdata = {
+ PLL(pll_1451x, 0, "fout_bus0_pll", "fin_pll", BUS0_PLL_LOCK,
+ BUS0_PLL_CON0, NULL),
+ PLL(pll_1452x, 0, "fout_cc_pll", "fin_pll", CC_PLL_LOCK,
+ CC_PLL_CON0, NULL),
+ PLL(pll_1452x, 0, "fout_bus1_pll", "fin_pll", BUS1_DPLL_LOCK,
+ BUS1_DPLL_CON0, NULL),
+ PLL(pll_1452x, 0, "fout_mfc_pll", "fin_pll", MFC_PLL_LOCK,
+ MFC_PLL_CON0, NULL),
+ PLL(pll_1460x, 0, "fout_aud_pll", "fin_pll", AUD_PLL_LOCK,
+ AUD_PLL_CON0, NULL),
+};
+
+static struct samsung_cmu_info topc_cmu_info __initdata = {
+ .pll_clks = topc_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(topc_pll_clks),
+ .mux_clks = topc_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(topc_mux_clks),
+ .div_clks = topc_div_clks,
+ .nr_div_clks = ARRAY_SIZE(topc_div_clks),
+ .fixed_factor_clks = topc_fixed_factor_clks,
+ .nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks),
+ .nr_clk_ids = TOPC_NR_CLK,
+ .clk_regs = topc_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(topc_clk_regs),
+};
+
+static void __init exynos7_clk_topc_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &topc_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
+ exynos7_clk_topc_init);
+
+/* Register Offset definitions for CMU_TOP0 (0x105D0000) */
+#define MUX_SEL_TOP00 0x0200
+#define MUX_SEL_TOP01 0x0204
+#define MUX_SEL_TOP03 0x020C
+#define MUX_SEL_TOP0_PERIC3 0x023C
+#define DIV_TOP03 0x060C
+#define DIV_TOP0_PERIC3 0x063C
+#define ENABLE_SCLK_TOP0_PERIC3 0x0A3C
+
+/* List of parent clocks for Muxes in CMU_TOP0 */
+PNAME(mout_bus0_pll_p) = { "fin_pll", "dout_sclk_bus0_pll" };
+PNAME(mout_bus1_pll_p) = { "fin_pll", "dout_sclk_bus1_pll" };
+PNAME(mout_cc_pll_p) = { "fin_pll", "dout_sclk_cc_pll" };
+PNAME(mout_mfc_pll_p) = { "fin_pll", "dout_sclk_mfc_pll" };
+
+PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
+ "ffac_top0_bus0_pll_div2"};
+PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
+ "ffac_top0_bus1_pll_div2"};
+PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
+ "ffac_top0_cc_pll_div2"};
+PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
+ "ffac_top0_mfc_pll_div2"};
+
+PNAME(mout_top0_group1) = {"mout_top0_half_bus0_pll",
+ "mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
+ "mout_top0_half_mfc_pll"};
+
+static unsigned long top0_clk_regs[] __initdata = {
+ MUX_SEL_TOP00,
+ MUX_SEL_TOP01,
+ MUX_SEL_TOP03,
+ MUX_SEL_TOP0_PERIC3,
+ DIV_TOP03,
+ DIV_TOP0_PERIC3,
+ ENABLE_SCLK_TOP0_PERIC3,
+};
+
+static struct samsung_mux_clock top0_mux_clks[] __initdata = {
+ MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
+ MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
+ MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
+ MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
+
+ MUX(0, "mout_top0_half_mfc_pll", mout_top0_half_mfc_pll_p,
+ MUX_SEL_TOP01, 4, 1),
+ MUX(0, "mout_top0_half_cc_pll", mout_top0_half_cc_pll_p,
+ MUX_SEL_TOP01, 8, 1),
+ MUX(0, "mout_top0_half_bus1_pll", mout_top0_half_bus1_pll_p,
+ MUX_SEL_TOP01, 12, 1),
+ MUX(0, "mout_top0_half_bus0_pll", mout_top0_half_bus0_pll_p,
+ MUX_SEL_TOP01, 16, 1),
+
+ MUX(0, "mout_aclk_peric1_66", mout_top0_group1, MUX_SEL_TOP03, 12, 2),
+ MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
+
+ MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
+ MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
+ MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
+ MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
+};
+
+static struct samsung_div_clock top0_div_clks[] __initdata = {
+ DIV(DOUT_ACLK_PERIC1, "dout_aclk_peric1_66", "mout_aclk_peric1_66",
+ DIV_TOP03, 12, 6),
+ DIV(DOUT_ACLK_PERIC0, "dout_aclk_peric0_66", "mout_aclk_peric0_66",
+ DIV_TOP03, 20, 6),
+
+ DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
+ DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
+ DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
+ DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
+};
+
+static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+ GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
+ ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
+ GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
+ ENABLE_SCLK_TOP0_PERIC3, 8, 0, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "dout_sclk_uart1",
+ ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
+ ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
+};
+
+static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
+ FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
+ FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
+ FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
+};
+
+static struct samsung_cmu_info top0_cmu_info __initdata = {
+ .mux_clks = top0_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(top0_mux_clks),
+ .div_clks = top0_div_clks,
+ .nr_div_clks = ARRAY_SIZE(top0_div_clks),
+ .gate_clks = top0_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(top0_gate_clks),
+ .fixed_factor_clks = top0_fixed_factor_clks,
+ .nr_fixed_factor_clks = ARRAY_SIZE(top0_fixed_factor_clks),
+ .nr_clk_ids = TOP0_NR_CLK,
+ .clk_regs = top0_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(top0_clk_regs),
+};
+
+static void __init exynos7_clk_top0_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &top0_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
+ exynos7_clk_top0_init);
+
+/* Register Offset definitions for CMU_PERIC0 (0x13610000) */
+#define MUX_SEL_PERIC0 0x0200
+#define ENABLE_PCLK_PERIC0 0x0900
+#define ENABLE_SCLK_PERIC0 0x0A00
+
+/* List of parent clocks for Muxes in CMU_PERIC0 */
+PNAME(mout_aclk_peric0_66_p) = { "fin_pll", "dout_aclk_peric0_66" };
+PNAME(mout_sclk_uart0_p) = { "fin_pll", "sclk_uart0" };
+
+static unsigned long peric0_clk_regs[] __initdata = {
+ MUX_SEL_PERIC0,
+ ENABLE_PCLK_PERIC0,
+ ENABLE_SCLK_PERIC0,
+};
+
+static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
+ MUX(0, "mout_aclk_peric0_66_user", mout_aclk_peric0_66_p,
+ MUX_SEL_PERIC0, 0, 1),
+ MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
+ MUX_SEL_PERIC0, 16, 1),
+};
+
+static struct samsung_gate_clock peric0_gate_clks[] __initdata = {
+ GATE(PCLK_UART0, "pclk_uart0", "mout_aclk_peric0_66_user",
+ ENABLE_PCLK_PERIC0, 16, 0, 0),
+
+ GATE(SCLK_UART0, "sclk_uart0_user", "mout_sclk_uart0_user",
+ ENABLE_SCLK_PERIC0, 16, 0, 0),
+};
+
+static struct samsung_cmu_info peric0_cmu_info __initdata = {
+ .mux_clks = peric0_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(peric0_mux_clks),
+ .gate_clks = peric0_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(peric0_gate_clks),
+ .nr_clk_ids = PERIC0_NR_CLK,
+ .clk_regs = peric0_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(peric0_clk_regs),
+};
+
+static void __init exynos7_clk_peric0_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &peric0_cmu_info);
+}
+
+/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
+#define MUX_SEL_PERIC10 0x0200
+#define MUX_SEL_PERIC11 0x0204
+#define ENABLE_PCLK_PERIC1 0x0900
+#define ENABLE_SCLK_PERIC10 0x0A00
+
+CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
+ exynos7_clk_peric0_init);
+
+/* List of parent clocks for Muxes in CMU_PERIC1 */
+PNAME(mout_aclk_peric1_66_p) = { "fin_pll", "dout_aclk_peric1_66" };
+PNAME(mout_sclk_uart1_p) = { "fin_pll", "sclk_uart1" };
+PNAME(mout_sclk_uart2_p) = { "fin_pll", "sclk_uart2" };
+PNAME(mout_sclk_uart3_p) = { "fin_pll", "sclk_uart3" };
+
+static unsigned long peric1_clk_regs[] __initdata = {
+ MUX_SEL_PERIC10,
+ MUX_SEL_PERIC11,
+ ENABLE_PCLK_PERIC1,
+ ENABLE_SCLK_PERIC10,
+};
+
+static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
+ MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_p,
+ MUX_SEL_PERIC10, 0, 1),
+
+ MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
+ MUX_SEL_PERIC11, 20, 1),
+ MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
+ MUX_SEL_PERIC11, 24, 1),
+ MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
+ MUX_SEL_PERIC11, 28, 1),
+};
+
+static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
+ GATE(PCLK_UART1, "pclk_uart1", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 9, 0, 0),
+ GATE(PCLK_UART2, "pclk_uart2", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 10, 0, 0),
+ GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
+ ENABLE_PCLK_PERIC1, 11, 0, 0),
+
+ GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
+ ENABLE_SCLK_PERIC10, 9, 0, 0),
+ GATE(SCLK_UART2, "sclk_uart2_user", "mout_sclk_uart2_user",
+ ENABLE_SCLK_PERIC10, 10, 0, 0),
+ GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
+ ENABLE_SCLK_PERIC10, 11, 0, 0),
+};
+
+static struct samsung_cmu_info peric1_cmu_info __initdata = {
+ .mux_clks = peric1_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(peric1_mux_clks),
+ .gate_clks = peric1_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(peric1_gate_clks),
+ .nr_clk_ids = PERIC1_NR_CLK,
+ .clk_regs = peric1_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(peric1_clk_regs),
+};
+
+static void __init exynos7_clk_peric1_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &peric1_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
+ exynos7_clk_peric1_init);
+
+/* Register Offset definitions for CMU_PERIS (0x10040000) */
+#define MUX_SEL_PERIS 0x0200
+#define ENABLE_PCLK_PERIS_SECURE_CHIPID 0x0910
+#define ENABLE_SCLK_PERIS_SECURE_CHIPID 0x0A10
+
+/* List of parent clocks for Muxes in CMU_PERIS */
+PNAME(mout_aclk_peris_66_p) = { "fin_pll", "dout_aclk_peris_66" };
+
+static unsigned long peris_clk_regs[] __initdata = {
+ MUX_SEL_PERIS,
+ ENABLE_PCLK_PERIS_SECURE_CHIPID,
+ ENABLE_SCLK_PERIS_SECURE_CHIPID,
+};
+
+static struct samsung_mux_clock peris_mux_clks[] __initdata = {
+ MUX(0, "mout_aclk_peris_66_user",
+ mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
+};
+
+static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+ GATE(PCLK_CHIPID, "pclk_chipid", "mout_aclk_peris_66_user",
+ ENABLE_PCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+ GATE(SCLK_CHIPID, "sclk_chipid", "fin_pll",
+ ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+};
+
+static struct samsung_cmu_info peris_cmu_info __initdata = {
+ .mux_clks = peris_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(peris_mux_clks),
+ .gate_clks = peris_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(peris_gate_clks),
+ .nr_clk_ids = PERIS_NR_CLK,
+ .clk_regs = peris_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(peris_clk_regs),
+};
+
+static void __init exynos7_clk_peris_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &peris_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
+ exynos7_clk_peris_init);
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
new file mode 100644
index 0000000..7620058
--- /dev/null
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
+#define _DT_BINDINGS_CLOCK_EXYNOS7_H
+
+/* TOPC */
+#define DOUT_ACLK_PERIS 1
+#define DOUT_SCLK_BUS0_PLL 2
+#define DOUT_SCLK_BUS1_PLL 3
+#define DOUT_SCLK_CC_PLL 4
+#define DOUT_SCLK_MFC_PLL 5
+#define TOPC_NR_CLK 6
+
+/* TOP0 */
+#define DOUT_ACLK_PERIC1 1
+#define DOUT_ACLK_PERIC0 2
+#define CLK_SCLK_UART0 3
+#define CLK_SCLK_UART1 4
+#define CLK_SCLK_UART2 5
+#define CLK_SCLK_UART3 6
+#define TOP0_NR_CLK 7
+
+/* PERIC0 */
+#define PCLK_UART0 1
+#define SCLK_UART0 2
+#define PERIC0_NR_CLK 3
+
+/* PERIC1 */
+#define PCLK_UART1 1
+#define PCLK_UART2 2
+#define PCLK_UART3 3
+#define SCLK_UART1 4
+#define SCLK_UART2 5
+#define SCLK_UART3 6
+#define PERIC1_NR_CLK 7
+
+/* PERIS */
+#define PCLK_CHIPID 1
+#define SCLK_CHIPID 2
+#define PERIS_NR_CLK 3
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
