On 13/05/22 20:38, Krzysztof Kozlowski wrote: > On 12/05/2022 11:41, Chris Packham wrote: >> Convert the existing device tree binding to YAML format. >> >> The old binding listed the interrupt-controller and related properties >> as required but there are sufficiently many existing usages without it >> that the YAML binding does not make the interrupt properties required. >> >> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> >> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> >> --- >> >> Notes: >> Changes in v3: >> - Correct indent in example >> - Move offset and marvell,pwm-offset to separate patch >> - Correct some documentation cross references > Thank you for your patch. There is something to discuss/improve. > >> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml >> new file mode 100644 >> index 000000000000..2d95ef707f53 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml >> @@ -0,0 +1,143 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://scanmail.trustwave.com/?c=20988&d=rJn-4g1s6Eg0HzmHuA8bPCoTV-chhtJg5SGZN2xCmw&u=http%3a%2f%2fdevicetree%2eorg%2fschemas%2fgpio%2fgpio-mvebu%2eyaml%23 >> +$schema: http://scanmail.trustwave.com/?c=20988&d=rJn-4g1s6Eg0HzmHuA8bPCoTV-chhtJg5SXKYz9BlA&u=http%3a%2f%2fdevicetree%2eorg%2fmeta-schemas%2fcore%2eyaml%23 >> + >> +title: Marvell EBU GPIO controller >> + >> +maintainers: >> + - Thierry Reding <thierry.reding@xxxxxxxxx> >> + - Lee Jones <lee.jones@xxxxxxxxxx> > These should be rather platform or driver maintainers, not subsystem > folks. Unless it happens that Thierry and Lee are for platform? Based on lines authored that would be Thomas and Andrew. But perhaps someone from Marvell or PLVision have an interest in adopting the driver and it's binding? For now I'll put Thomas and Andrew until someone else steps up. > >> + >> +properties: >> + compatible: >> + oneOf: >> + - enum: >> + - marvell,armada-8k-gpio >> + - marvell,orion-gpio >> + >> + - items: >> + - enum: >> + - marvell,mv78200-gpio >> + - marvell,armada-370-gpio >> + - marvell,armadaxp-gpio >> + - const: marvell,orion-gpio >> + >> + reg: >> + description: | >> + Address and length of the register set for the device. Not used for >> + marvell,armada-8k-gpio. >> + >> + For the "marvell,armadaxp-gpio" variant a second entry is expected for >> + the per-cpu registers. For other variants second entry can be provided, >> + for the PWM function using the GPIO Blink Counter on/off registers. >> + minItems: 1 >> + maxItems: 2 >> + >> + reg-names: >> + items: >> + - const: gpio >> + - const: pwm >> + minItems: 1 >> + >> + interrupts: >> + description: | >> + The list of interrupts that are used for all the pins managed by this >> + GPIO bank. There can be more than one interrupt (example: 1 interrupt >> + per 8 pins on Armada XP, which means 4 interrupts per bank of 32 >> + GPIOs). >> + minItems: 1 >> + maxItems: 4 >> + >> + interrupt-controller: true >> + >> + "#interrupt-cells": >> + const: 2 >> + >> + gpio-controller: true >> + >> + ngpios: >> + minimum: 1 >> + maximum: 32 >> + >> + "#gpio-cells": >> + const: 2 >> + >> + "#pwm-cells": >> + description: >> + The first cell is the GPIO line number. The second cell is the period >> + in nanoseconds. >> + const: 2 >> + >> + clocks: >> + description: >> + Clock(s) used for PWM function. >> + items: >> + - description: Core clock >> + - description: AXI bus clock >> + minItems: 1 >> + >> + clock-names: >> + items: >> + - const: core >> + - const: axi >> + minItems: 1 >> + >> +required: >> + - compatible >> + - gpio-controller >> + - ngpios >> + - "#gpio-cells" >> + >> +allOf: >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: marvell,armada-8k-gpio >> + then: >> + required: >> + - offset >> + else: >> + required: >> + - reg > one blank line please > >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: marvell,armadaxp-gpio > Original bindings are saying that second reg is optional for > marvell,armada-370-gpio. What about other cases, e.g. mv78200-gpio? Is > it also allowed (and optional) there? This is where things get interesting. The armadaxp (and only the armadaxp) requires a second register value for some per-cpu registers. All of the other SoCs can have an optional 2nd register value if they want to use the PWM function. I guess that implies that the armadaxp can't do PWM. >> + then: >> + properties: >> + reg: >> + minItems: 2 > Then you also should require two reg-names. Simple enough to add. But currently we've said that the reg-names are "gpio" and "pwm" but on the armadaxp the 2nd one is not "pwm" but something else ("per-cpu" perhaps?) On the other hand this is all completely moot because the armada-xp-mv78*.dtsi actually use the "marvell,armada-370-gpio" compatible so this appears to be documenting something that is no longer used. Indeed it appears that the armadaxp specific usage was remove in 5f79c651e81e ("arm: mvebu: use global interrupts for GPIOs on Armada XP"). So perhaps the best course of action is to drop marvell,armadaxp-gpio from the new binding (noting that we've done so in the commit message). > > > Best regards, > Krzysztof