Hello Jonathan and Stanimir,
> >> See Documentation/ABI/sysfs-bus-iio
> >> Millivolts I think... We copied hwmon where possible.
> >
> > I'm a bit confused about these units. I searched references of
> > iio_read_channel_processed() and found a few.
> >
> > The iio_hwmon expecting milivolts. On the other side lp8788-charger.c
> > registers a get_property method in charger-manager.c, which expects
> > microvolts in get_batt_uV().
> It's definitely meant to be millivolts (lifted from hwmon a while back).
> See Documentation/ABI/testing/sysfs-bus-iio
>
> Looks like we have a bug in lp8788-charger - it might be matched with one in
> lp8788-adc, but then there will be a bug there...
>
> Cc'd Milo Kim.
'lp8788-charger' registers not charger-manager but power-supply subsystem.
'lp8788-adc' is the IIO driver.
'lp8788-charger' is the IIO consumer of lp8788-adc.
(How to communicate between lp8788-adc and lp8788-charger)
1. Application requests vbatt(battery voltage) by accessing /sys/class/power/
2. lp8788-charger asks lp8788-adc to get converted vbatt value
3. lp8788-adc get the battery ADC from the device.
It returns calculated micro voltage to lp8788-charger.
4. lp8788-charger reports this uV value to the application
5. Application uses uV or converts to mV or V unit. It's up to the app.
Please note that battery app accesses not /sys/bus/iio but /sys/class/power/.
Best regards,
Milo
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
