On Sun, Sep 21, 2014 at 2:58 AM, Daniel Mack <daniel@xxxxxxxxxx> wrote:
>
> Hi,
>
> On 09/21/2014 05:01 AM, Matt Ranostay wrote:
> > Several other variants of the cap11xx device exists with a varying
> > number of capacitance detection channels. Add support for creating
> > the channels dynamically.
>
> Thanks for the patches!
>
> >
> > Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
> > ---
> > drivers/input/keyboard/cap1106.c | 54 +++++++++++++++++++---------------------
>
> Please also add a patch to rename the file to cap11xx.c, and make sure
> to export the patch with 'git format-patch -M' to detect the rename.
>
> > diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
> > index d70b65a..b9c43b5 100644
> > --- a/drivers/input/keyboard/cap1106.c
> > +++ b/drivers/input/keyboard/cap1106.c
> > @@ -55,8 +55,6 @@
> > #define CAP1106_REG_MANUFACTURER_ID 0xfe
> > #define CAP1106_REG_REVISION 0xff
> >
> > -#define CAP1106_NUM_CHN 6
> > -#define CAP1106_PRODUCT_ID 0x55
> > #define CAP1106_MANUFACTURER_ID 0x5d
> >
> > struct cap1106_priv {
> > @@ -64,7 +62,8 @@ struct cap1106_priv {
> > struct input_dev *idev;
> >
> > /* config */
> > - unsigned short keycodes[CAP1106_NUM_CHN];
> > + u32 *keycodes;
>
> unsigned short *, please. See below.
>
> > @@ -189,27 +188,23 @@ static int cap1106_i2c_probe(struct i2c_client *i2c_client,
> > struct cap1106_priv *priv;
> > struct device_node *node;
> > int i, error, irq, gain = 0;
> > - unsigned int val, rev;
> > - u32 gain32, keycodes[CAP1106_NUM_CHN];
> > + unsigned int val, prod, rev;
> > + u32 gain32;
> >
> > priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > if (!priv)
> > return -ENOMEM;
> >
> > + priv->num_channels = (unsigned long) id->driver_data;
>
> priv->num_channels is unsigned int.
>
> Also, a BUG_ON(!priv->num_channels) wouldn't harm.
Oops. Will fix..
>
> > + priv->keycodes = devm_kzalloc(dev,
> > + sizeof(u32) * priv->num_channels, GFP_KERNEL);
>
> Use devm_kcalloc() to allocate an array.
>
> > @@ -235,17 +234,12 @@ static int cap1106_i2c_probe(struct i2c_client *i2c_client,
> > dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
> > }
> >
> > - BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
> > -
> > /* Provide some useful defaults */
> > - for (i = 0; i < ARRAY_SIZE(keycodes); i++)
> > - keycodes[i] = KEY_A + i;
> > + for (i = 0; i < priv->num_channels; i++)
> > + priv->keycodes[i] = KEY_A + i;
> >
> > of_property_read_u32_array(node, "linux,keycodes",
> > - keycodes, ARRAY_SIZE(keycodes));
> > -
> > - for (i = 0; i < ARRAY_SIZE(keycodes); i++)
> > - priv->keycodes[i] = keycodes[i];
> > + priv->keycodes, priv->num_channels);
>
> Hmm, no. Internally, you have to store the keycodes as unsigned short,
> otherwise EVIOC{G|S}KEYCODE from usespace doesn't work.
>
> of_property_read_u16_array() should work here for unsigned short, I
> guess. Otherwise, you'd have to open-code the routine.
>
Ok I'l test that.
> > @@ -313,12 +307,16 @@ static int cap1106_i2c_probe(struct i2c_client *i2c_client,
> >
> > static const struct of_device_id cap1106_dt_ids[] = {
> > { .compatible = "microchip,cap1106", },
> > + { .compatible = "microchip,cap1126", },
> > + { .compatible = "microchip,cap1188", },
>
> Hmm, how can that work unless you set .data to the number of channels
> here? Did you test that with a DT-enabled board?
>
Yes it was tested on a BBB. The num_channels is set from cap1106_i2c_ids
>
> Thanks,
> Daniel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
