[PATCH v3 2/4] ARM: dts: imx6qdl-colibri: Mux mclk for sgtl5000 with the codec node

[Max Krummenacher <max.oss.09@xxxxxxxxx>]

From: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

Move the pin muxing for MCLK used by the codec to the codec node
instead of placing it inside the audmux pinctrl group.

While no negative effects have been observed this should make sure that
MCLK is provided when the codec driver is probed.

Follows commit fa51e1dc4b91 ("ARM: dts: imx6qdl-apalis: Fix sgtl5000
detection issue")

Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

---

(no changes since v2)

Changes in v2:
- Added Fabio's 'Reviewed-by'

 arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 7df270cea292..f0908b530f86 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -520,6 +520,8 @@
 		compatible = "fsl,sgtl5000";
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_module_3v3_audio>;
@@ -739,8 +741,6 @@
 
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
 			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
 			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
 			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
@@ -991,6 +991,13 @@
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-- 
2.20.1