Re: [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Biju,

Thank you for the review.

On Thu, May 12, 2022 at 6:35 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> Thanks for the patch.
>
> > Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Subject: [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to
> > handle GPIO interrupt
> >
> > Add IRQ domian to RZ/G2L pinctrl driver to handle GPIO interrupt.
> >
> > GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be used as
> > IRQ lines at given time. Selection of pins as IRQ lines is handled by IA55
> > (which is the IRQC block) which sits in between the GPIO and GIC.
>
> Do we need to update bindings with interrupt-cells on [1] like [2] as it act as parent for GPIO interrupts?
>
Yes interrupt-controller and interrupt-parent needs to be added. I'm
wondering if "interrupt-cells" is not required. If the pin is an
interrupt it will be passed as an GPIO.

@Geert - your thoughts ?

Cheers,
Prabhakar



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux